214749
99
Zoom out
Zoom in
Previous page
1/165
Next page
98
User’s Guide
Monitoring and Controlling Projectors via a Network (for the EMP-7900)
You can monitor the status of the projector and control operations such as
turning the power on and off from a computer via a network.
Available Network Functions for the EMP-7900
The EMP-7900 is compatible with SNMPg.
In addition, you can use the software that is included with the projector for
centralised control of projectors and to receive notifications of problems
via e-mail.
You can use SNMP to monitor and control the status of the projector from
a computer.
The management functions that are available when using SNMP require
SNMP manager program to be installed on the computer. Because of this,
management using SNMP should always be carried out by somebody who
is familiar with computer networks such as a network administrator.
The Projector Software CD-ROM supplied with the projector contains the
following two software programs. These programs can be used to carry out
the following network monitoring and control tasks.
EMP Monitor
This software is used to monitor the status of multiple projectors that are
connected to a network by means of a list on the computer screen, and to
control the projectors all at once by carrying out operations such as
turning the power for the projectors on or off. It allows multiple
projectors on a network to be monitored and controlled by a single
operator.
EMP NetworkManager
This program lets you make network settings for projectors from
configuration menus using a remote control. However, you can use the
keyboard of a computer for direct address entry when using EMP
NetworkManager, so that network settings can be carried out easily. In
addition, EMP NetworkManager can be used to make settings for the
mail notification function, so that notifications of problems with projector
operation can be sent via e-mail to preset e-mail addresses when such
problems occur.
Carry out the following operations in the order listed in order to set up
monitoring and control of projectors via a network.
1.Use the Projector Software CD-ROM to install the software to be
used into the computer. p.99
2.Connect the projector to the network using the a network cable.
p.101
3. Use the projector's configuration menus to make the required
network settings. p.101
4.Use the computer to monitor and control the projector.
Monitoring and control using EMP Monitor p.108
Monitoring by means of the mail notification function p.103
Monitoring Function Using SNMP and the SNMP Manager
Program
Monitoring and Control Functions Using the Accessory
Software
TIP
The network functions differ for the EMP-7950 and the EMP-7900.
The following descriptions apply to the EMP-7900. If using the EMP-
7950, refer to the EasyMP Network Setup Guide and the EasyMP
Operation Guide.
99


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson emp 7950nl at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson emp 7950nl in the language / languages: English as an attachment in your email.

The manual is 9,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info