214749
98
Zoom out
Zoom in
Previous page
1/165
Next page
97
Using the Configuration Menu Functions
User’s Guide
Select a setting value.
Tilt the [ ] button on the remote control or press the [ ] or [ ]
button on the projector's control panel to change setting values.
For items which are currently set, a appears in green next to
the setting. If you tilt the [ ] button on the remote control or
press the [ ] or [ ] button on the projector's control panel to
select an item to be set, the will appear in orange. After
making the selection, press the [Enter] button on the remote
control or the [Auto/Enter] button on the projector's control
panel to accept the setting. When the setting is accepted, the
changes to green.
Select other menu items in the same way.
Repeat steps 2 to 5 to change the settings for other menu items.
To return to a previous menu, press the [ESC] button on either
the remote control or the projector's control panel.
Close the menu.
Press the [Menu] button on either the remote control or the
projector's control panel.
TIP
The items appearing in the "Video" menu and the "About" menu will
vary depending on the type of input source being projected.
Standby Mode
:
Color Adjustment
Color Temp. RGB
Rear Proj.
Language Select [English]
Reset
Execute
Adjust
ON OFF
:
:
Ceiling ON OFF
:
Network ON Network OFF
Startup Screen ON OFF
:
Progressive
:
OFF Video Film/Auto
TIP
• Sub-menu items which cause another sub-menu to be displayed
when they are selected have after them. If you select such menu
items and press the [Enter] button on the remote control or the
[Auto/Enter] button on the projector's control panel, you can then
change the settings in the next sub-menu which appears.
• Refer to "List of Functions" for details on the functions of each
menu item. p.78
TIP
The display position for configuration menus can be set to either the
top-left or the bottom-right of the images. If you press the [Menu]
button on either the remote control or the projector's control panel
twice in succession when displaying a configuration menu, the
configuration menu will be displayed in a different position from
before. If you would like to change configuration menu settings while
checking images, select an appropriate point in the projection and
then display the configuration menu.
98


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson emp 7950nl at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson emp 7950nl in the language / languages: English as an attachment in your email.

The manual is 9,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info