214488
92
Zoom out
Zoom in
Previous page
1/121
Next page
91
Problems Solving
User’s Guide
Connection cannot be established in access point mode or wired LAN connection mode
Connection is not possible in easy connection mode (ad hoc mode
g)
Is the computer's radio wave setting for the
wireless LAN set to low-intensity?
Change the radio wave setting to the highest possible intensity.
Is the LAN card you are using 802.11g or
802.11b compliant?
Only 802.11g or 802.11b compliant equipment can be used. You cannot use equipment conforming
to any other standards (such as 802.11 or 802.11a).
Is WEPg encryption set to "ON" at the
computer?
If using easy connection mode (ad hoc modeg), WEP must be set to "OFF", otherwise connection
will not be possible. Set WEP encryption to "OFF". s"Connecting Using Easy Connect Mode
(Wireless LAN)" in the EasyMP Network Setup Guide
Check Remedy
Is the ESSIDg setting correct? Enable the automatic ESSID search function, or set the ESSID for the computer or access point and
the projector so that they are the same. s"Connecting in Access Point Mode or Wired LAN
Mode" in the EasyMP Network Setup Guide
Has an identical WEPg key been set? If "WEP" is selected in the "Security" configuration menu, set the WEP key for the computer or
access point and the projector to the same key. s"Connecting in Access Point Mode or Wired
LAN Mode" in the EasyMP Network Setup Guide
Are the connection refusal functions of the
access point, such as the MAC address
g and
port restrictions, set correctly?
Set the projector connection permissions on the access point.
Have the IP addressg, subnet maskg and
gateway
g address for the access point and
the projector been set correctly?
If not using DHCPg, make all of the settings manually.
s"Connecting in Access Point Mode or Wired LAN Mode" in the EasyMP Network Setup Guide
Have the same subnet masks been set for the
access point and the projector?
Select "Use IP connect mode" in EMP NS Connection and connect using IP connect mode.
s"If No Connected Projectors Appear" in the EasyMP Operation Guide
Check Remedy
Is there an access point manufactured by
BUFFALO operating nearby?
Ad hoc connection is not possible if there is a BUFFALO access point set to the same ESSIDg,
operating nearby. Turn off the power to the Melco access point or select an ESSID different to that
access point.
Check Remedy
92


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson emp 755 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson emp 755 in the language / languages: English as an attachment in your email.

The manual is 6,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info