214488
91
Zoom out
Zoom in
Previous page
1/121
Next page
90
Problems Solving
User’s Guide
EMP NS Connection starts, but a projector is not found
Check Remedy
Is the wireless or wired LAN card inserted? Check that the wireless or wired LAN card is correctly inserted into the card slot of the projector.
"Inserting and Removing Cards" sp.17
Is the network cable connected correctly? Check that the network cable is connected correctly. If it is not connected or is connected
incorrectly, reconnect it.
Is the access lamp of the wireless LAN card
that is inserted into the projector lit green?
If the access lamp is off, remove the wireless LAN card and re-insert it.
"Inserting and Removing Cards" sp.17
Is the projector displaying the EasyMP
configuration menu screen?
Network connections are disabled while the EasyMP configuration setting screen is displayed.
Close the configuration settings to return to the EasyMP standby window.
Is the computer ready for LAN card or in-built
LAN functionality to be used?
Check whether the LAN device is functioning in the Device Manager. For example, "Control panel" -
"System" - "Device Manager".
Is the wireless LAN setting for the computer
set to ad hoc mode
g?
Change the wireless LAN settings at the computer to ad hoc mode.
s"Computer Wireless LAN Settings" in the EasyMP Network Setup Guide
Depending on the manufacturer of the wireless LAN card, you may be able to use a communication
setting utility (such as Client Manager) to set ad hoc mode.
"Ad hoc mode" may be expressed using some other terminology such as "Computer communication
using wireless LAN (WiFi)", "Wi-Fi ad hoc", "802.11 ad hoc", "802.11 Mode Connection" or "Peer
to Peer".
Is the DHCPg function of the wired LAN set to
"ON"?
Set the DHCP setting of the wired LAN to "OFF" in the EasyMP configuration setting screen.
s"Connecting in Access Point Mode or Wired LAN Mode" in the EasyMP Network Setup Guide
Has the network adapter been selected
correctly in EMP NS Connection?
If the computer that you are using has several LAN environments, the correct network adapter to be
used by EMP NS Connection must be selected, otherwise it will not be possible to connect. Start
EMP NS Connection and select the network adapter from the "Extension" - "Switch LAN"
(Windows) or "Extension" - "Network Set" (Macintosh) menu.
If making a wireless LAN connection, are
there any settings within the power saving
features of your computer which disable the
wireless LAN?
Please enable the wireless LAN.
When connected to a wired LAN
When connected to a wireless
LAN in easy connection mode
When connected to a wireless
LAN in easy connection mode
91


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson emp 755 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson emp 755 in the language / languages: English as an attachment in your email.

The manual is 6,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info