500185
179
Zoom out
Zoom in
Previous page
1/215
Next page
The Easy Interactive Pen does not work
Check Remedy
There is an obstacle in the signal route between the Easy Interactive
Pen and the projector.
Remove the obstacle. Also, do not block the signal route when standing in front of the projection screen.
The signal is interfering with other things such as a light source that
is emitting infrared rays.
Do not use an infrared remote control or infrared microphone in the same room because the Easy Interactive Pen may
malfunction. Switch off the interfering device such as a light source that is emitting infrared rays.
The battery is low. Replace the battery.
The surrounding area is too bright. Do not allow strong light to shine on the projected screen or the projector's Easy Interactive Function receiver.
Has pen calibration been performed correctly? Make sure you perform pen calibration when using the Easy Interactive Pen for the first time so that the projector
recognizes the position of the pen correctly.
Also, calibrate the pen again if you notice any discrepancy in positioning.
s "Auto Calibration" p.65
Are multiple projectors being used in the same room? If multiple projectors are being used in the same room, Easy Interactive Pen operations may become unstable depending
on the environment. Change the Distance of Projectors setting from the Configuration menu.
s Extended - Easy Interactive Function - Distance of Projectors p.144
The response time for the Easy Interactive Pen is slow
Check Remedy
Is Windows Aero enabled?
(Windows Vista/7 only)
The reaction time for the Easy Interactive Pen may be slow when Windows Aero is enabled. Disable the Windows Aero
function on the computer.
When using USB Display:
Click All Programs - EPSON Projector - Epson USB Display - Epson USB Display Vx.xx Settings, and then select
Disable Windows Aero and improve the tracking of the interactive pen.
The dot does not move to the next position
Check Remedy
Information from the projection screen is not correctly received due
to other things, such as a light source that is emitting infrared rays.
Move the device, such as a light source that is emitting infrared rays, away from the projector, or move the projector away
from the device.
Problem Solving
179
179


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson EB1400Wi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson EB1400Wi in the language / languages: English as an attachment in your email.

The manual is 6,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson EB1400Wi

Epson EB1400Wi Installation Guide - English - 35 pages

Epson EB1400Wi User Manual - German - 225 pages

Epson EB1400Wi User Manual - Dutch - 222 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info