617825
144
Zoom out
Zoom in
Previous page
1/166
Next page
144
Solving Projector or Remote Control Operation Problems
projector's Settings menu is turned on if available.
Check the solutions in these sections if you have problems operating the
gg Related Links
projector or remote control.
• "Projector Setup Settings - ECO Menu" p.115
• "Projector Indicators Status" p.135
gg Related Links
• "Projector Feature Settings - Settings Menu" p.105
• "Solutions to Projector Power or Shut-Off Problems" p.144
• "Unlocking the Projector's Buttons" p.79
• "Solutions to Problems with the Remote Control" p.144
• "Solutions to Password Problems" p.145
Solutions to Problems with the Remote Control
Solutions to Projector Power or Shut-Off Problems
If the projector does not respond to remote control commands, try the
following solutions:
If the projector does not turn on when you press the power button or it turns
• Check that the remote control batteries are installed correctly and have
off unexpectedly, try the following solutions:
power. If necessary, replace the batteries.
• Make sure the power cord is securely connected to the projector and to a
• Make sure you are operating the remote control within the reception angle
working electrical outlet.
and range of the projector.
• The projector's buttons may be locked for security. Unlock the buttons in
• Make sure the projector is not warming up or shutting down.
the Control Panel Lock setting in the projector's Settings menu or use the
• Check to see if a button on the remote control is stuck down, causing it to
remote control to turn on the projector.
enter sleep mode. Release the button to wake the remote control up.
s Settings > Lock Setting > Control Panel Lock
• Strong fluorescent lighting, direct sunlight, or infrared device signals may be
• The power cord may be defective. Disconnect the cord and contact Epson
interfering with the projector's remote receivers. Dim the lights or move the
for help.
projector away from the sun or interfering equipment.
• If the projector's lamp turns off unexpectedly, it may have entered sleep
• Make sure at least one of the remote receivers are available in the Remote
mode after a period of inactivity. Perform any operation to wake the
Receiver setting in the projector's Settings menu.
projector. To turn off sleep mode, select Off as the Sleep Mode setting in
the projector's ECO menu.
• If the Remote Receiver setting is disabled, hold down the [Menu] button on
the remote control for at least 15 seconds to reset the setting to its default.
• If the projector's lamp turns off unexpectedly, the A/V mute timer may be
enabled. To turn off the A/V mute timer, select Off as the A/V Mute Timer
• If you assigned an ID number to the projector to operate multiple projectors
setting in the projector's ECO menu.
from the remote control, you may need to check or change the ID setting.
• If the projector's lamp turns off unexpectedly, the lens cover timer may be
• If you lose the remote control, you can order another one from Epson.
enabled. To turn off the lens cover timer, select Off as the Lens Cover
gg Related Links
Timer setting in the projector's ECO menu.
• "Remote Control Operation" p.30
• If the projector's lamp turns off, the Status indicator is flashing, and the
• "Projector Feature Settings - Settings Menu" p.105
Temp indicator is lit, the projector has overheated and turned off.
• "Selecting the Projector You want to Operate" p.73
• If the power button on the remote control does not turn on the projector,
• "Replacing the Remote Control Batteries" p.132
check its batteries and make sure the Remote Receiver setting in the
144


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson EB-S04 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson EB-S04 in the language / languages: English as an attachment in your email.

The manual is 2,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson EB-S04

Epson EB-S04 User Manual - German - 169 pages

Epson EB-S04 User Manual - Dutch - 169 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info