617825
142
Zoom out
Zoom in
Previous page
1/166
Next page
142
Solving Image or Sound Problems
• "Projector Setup Settings - ECO Menu" p.115
Solutions When the Image Brightness or Colors are Solutions to Sound Problems
Incorrect
If there is no sound or the volume is too low or high, try the following
solutions:
If the projected image is too dark or light, or the colors are incorrect, try the
following solutions:
• Adjust the projector's volume settings.
• Press the [Color Mode] button on the remote control to try different color • Press the [A/V Mute] button on the remote control to resume video and
modes for the image and environment. audio if they were temporarily stopped.
• Check your video source settings. • Check your computer or video source to make sure the volume is turned up
and the audio output is set for the correct source.
• Adjust the available settings on the projector's Image menu for the current
input source, such as Brightness, Contrast, Tint, Color Temp., and/or • Disconnect the audio cable, and then reconnect it.
Color Saturation.
• Check the audio cable connections between the projector and your video
• Make sure you selected the correct Input Signal or Video Signal setting in source.
the projector's Signal menu, if available for your image source.
• If you do not hear sound from an HDMI source, set the connected device to
s Signal > Advanced > Input Signal
PCM output.
s Signal > Advanced > Video Signal
• Make sure any connected audio cables are labeled "No Resistance".
• Make sure all the cables are securely connected to the projector and your
• If you are using the USB Display function, turn on the Output audio from
video device. If you connected long cables, try connecting shorter cables.
the projector setting in the Epson USB Display Settings program on your
• If you are using the ECO as the Power Consumption setting, try selecting
computer.
Normal in the projector's ECO menu.
• When you are connecting the projector to a Mac using an HDMI cable,
make sure your Mac supports audio through the HDMI port.
At high altitudes or locations subject to high temperatures, the image
• If the volume for the computer is set to the minimum while the projector is
may become darker and you may not be able to adjust the Power
a
set to the maximum, the noise may be mixed. Turn up the computer's
Consumption setting.
volume and turn down the projector's volume. (When you use EasyMP
Network Projection, EasyMP Multi PC Projection, USB Display or Quick
• Position the projector close enough to the screen.
Wireless Connection.)
• If the image has been progressively darkening, you may need to replace the
projector lamp soon.
gg Related Links
• "Projector Connections" p.21
gg Related Links
• "Projector Setup Settings - Extended Menu" p.107
• "Color Mode" p.53
• "Projector Setup Settings - ECO Menu" p.115
• "Input Signal Settings - Signal Menu" p.103
• "Controlling the Volume with the Volume Buttons" p.55
• "Image Quality Settings - Image Menu" p.101
142


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson EB-S04 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson EB-S04 in the language / languages: English as an attachment in your email.

The manual is 2,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson EB-S04

Epson EB-S04 User Manual - German - 169 pages

Epson EB-S04 User Manual - Dutch - 169 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info