675068
193
Zoom out
Zoom in
Previous page
1/225
Next page
Solving Image or Sound Problems
193
Check the solutions in these sections if you have any problems with projected
images or sound.
gg Related Links
• "Solutions When No Image Appears" p.193
• "Solutions When "No Signal" Message Appears" p.193
• "Solutions When "Not Supported" Message Appears" p.194
• "Solutions When Only a Partial Image Appears" p.194
• "Solutions When the Image is not Rectangular" p.195
• "Solutions When the Image Contains Noise or Static" p.195
• "Solutions When the Image is Fuzzy or Blurry" p.196
• "Solutions When the Image Brightness or Colors are Incorrect" p.196
• "Solutions When an Afterimage Remains on the Projected Image" p.197
• "Solutions to Sound Problems" p.197
• "Solutions When Image File Names are not Displayed Correctly in PC Free"
p.197
Solutions When No Image Appears
If no image appears, try the following solutions:
• Press the [A/V Mute] button on the remote control to see if the image was
temporarily turned off.
• Make sure all necessary cables are securely connected and the power is on
for the projector and connected video sources.
• Press the projector's power button to wake it from standby or sleep mode.
Also, check if the connected computer is in sleep mode or displaying a
blank screen saver.
• To project an image source connected to the Computer2/Monitor Out port,
set Monitor Out Port to Computer2 in the projector's Extended menu.
s Extended > Operation > Monitor Out Port
• Adjust the Brightness setting in the projector's Image menu.
• Adjust Brightness Settings.
s Settings > Brightness Settings
• Check the Display setting in the projector's Extended menu to make sure
Messages is set to On.
• If the projector does not respond when you press the control panel buttons,
the buttons may be locked for security. Unlock the buttons in the Control
Panel Lock setting in the projector's Settings menu or use the remote
control to turn on the projector.
s Settings > Lock Setting > Control Panel Lock
• For images projected with Windows Media Center, reduce the screen size
from full screen mode.
• For images projected from applications using Windows DirectX, turn off
DirectX functions.
• The projector may not be able to project copyrighted videos that you play
back on a computer. For more details, see the manual supplied with the
computer.
gg Related Links
• "Input Signal Settings - Signal Menu" p.153
• "Image Quality Settings - Image Menu" p.151
• "Projector Setup Settings - Extended Menu" p.158
• "Unlocking the Projector's Buttons" p.102
Solutions When "No Signal" Message Appears
If the "No Signal" message appears, try the following solutions:
• Press the [Source Search] button and wait a few seconds for an image to
appear.
• Turn on the connected computer or video source, and press play to begin
your presentation, if necessary.
• Check that all cables required for projection are securely connected.
• If you are projecting from a laptop computer, make sure it is set up to
display on an external monitor.
• If necessary, turn off the projector and the connected computer or video
source, and then turn them back on.
193


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson EB-L500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson EB-L500 in the language / languages: English as an attachment in your email.

The manual is 5,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson EB-L500

Epson EB-L500 User Manual - German - 232 pages

Epson EB-L500 User Manual - Dutch - 231 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info