Manual Envivo 1272 Powerline set (page 23 of 27) (English)

625183

Zoom out

Zoom in

1/27

Joining a Network

Scenario:

Devices A and B are located in network N. Users want to add device C (the

joiner) into network N. Any devices on network N can become the ‘adder’.

Figure 17 Join a HomePlugAV network

Do as follows to add device C to network N using the Security\Reset button:

1. Press the Security\Reset pushbutton on device C (the joiner) for

about 5-8 seconds. The device will reset and restart with a random

NMK.

2. Press the Security\Reset button on device C (the ‘joiner’) for less

than 3 seconds.

3. Within 30 seconds, press the Security\Reset button on device A (or

device B) for less than 3 seconds.

4. Wait for connection to complete.

The power indicator on both devices will flash evenly at 1 second intervals

until the operation succeeds or fails. If the connection succeeds, the Power

and Data indicators on both devices illuminate steadily. If the connection

fails, the Power indicators on both devices keep steady on, but the Data

indicators on both devices are off. In that case, repeat steps 1-4.

Leaving a Network

Scenario:

Device C is located in a network. Users want to remove device C (the

‘leaver’) from its network.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Envivo 1272 Powerline set in the language / languages: English as an attachment in your email.

The manual is 0,6 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Envivo 1272 Powerline set Manual

Product: