625183
22
Zoom out
Zoom in
Previous page
1/27
Next page
22
HOW TO USE THE SECURITY\RESET PUSHBUTTON
This chapter describes how to use the security\reset pushbutton to add
new devices into or remove devices from a HomePlug AV logical network
(AVLN).
You can monitor the operation progress and results by observing the Power
LED status.
Forming a HomePlug AV logical network
Scenario:
Devices A and B with different NMK values are connected to the same
powerline. Users want to use them to form a logical network.
Figure 16 Form a HomePlugAV network
Do as follows to form a logical network:
1. Press the Security\Reset pushbutton on device A or B for about 5-8
seconds. The device will reset and restart with a random NMK.
2. Press the Security\Reset button on device A for less than 3
seconds.
3. Within 2 minutes, press the Security\Reset button on device B for
less than 3 seconds.
4. Wait for connection to complete.
The power indicator on both devices will flash evenly at 1 second intervals
until the operation succeeds or fails. If the connection succeeds, the Power
and Data indicators on both devices illuminate steadily. If the connection
fails, the Power indicators on both devices keep steady on, but the Data
indicators on both devices are off. In that case, repeat steps 1-4.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Envivo 1272 Powerline set at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Envivo 1272 Powerline set in the language / languages: English as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info