603994
6
Zoom out
Zoom in
Previous page
1/32
Next page
6
USING THE MEDICINE CUP
In order to add a medicated vapor to the “mist” output:
1. Turn the POWER switch to the “OFF” position and allow the steam diuser to cool.
2.
Carefully add liquid medicine to medicine cup. DO NOT ll the cup more than half full.
3. Carefully place medicine cup on top of steam diuser
4. Turn the POWER switch to either the LO or HI position.
5. After use, remove the cup from the unit and clean any residue from the cup with
warm water.
WARNING:
DO NOT use any liquid medicine other than those specically recommended for use
with a steam vaporizer or warm mist humidier.
DO NOT pour medicine directly into the steam diuser openings nor add it to the
water in the tank or tray.
MINERAL ABSORPTION PAD INSTRUCTIONS
Warm mist humidiers do not spread ne mineral dust into the air that you breathe
nor on your furniture, the way that other type humidiers do. The mineral dust remains
trapped in the humidier hot water reservoir. Use of mineral absorption pads will
play a major role in capturing and removing minerals from hot water reservoir, and
preventing a stubborn mineral buildup. The unit can run without pads, but more
frequent cleaning will be required. The Mineral Absorption pad that ts your unit is the
EMP-15P
1.
Before starting humidier, place mineral absorption pad in the hot water reservoir.
After the humidier has been operating, the water will become HOT, and CAUTION
should be exercised when handling mineral absorption pad. It is best to allow
humidier water to cool down, and to use tongs or long tweezers when handling pad.
2. The useful life of the mineral absorption pad will vary, depending on the mineral
content of the water used. In areas of moderate mineral content water supply,
the mineral absorption pad should be changed after approximately (3) weeks
of continuous use. If the water is “Hard Water”, the pad should be changed more
frequently. The best way to tell when the pad should be changed is to examine it
AFTER the water has cooled down, to see if it is still soft and pliable. When the pad
is near the end of its life, it becomes sti and hard and should be replaced with a
new pad. Another sign to change pad is when scale begins to buildup on interior of
hot water reservoir. If pad appears to disintegrate (normally due to use of softened
water) discontinue use of pads.
CLEANING AND MAINTENANCE
Water contains minerals and other particles. During operation most of these minerals
will remain in the water reservoir. Gradual buildup of deposits will coat the hot water
reservoir and reduce its eciency. The importance of routine cleaning and care cannot
be over-emphasized. Hard water contains more minerals and other particles.
EWM-300W-350_OM.indd 6 3/26/07 2:58:04 PM
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Enviracaire EWM-300W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Enviracaire EWM-300W in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info