749195
31
Zoom out
Zoom in
Previous page
1/48
Next page
31
IP2288EN
EN
RO - Radio operations
Display Description Selections
available
RK - Menu navigation using remote control keyboard
ON - Enabled
OF - Disabled
With the display turned off, quickly type in the sequence of keys
3
3
2
4
1
from the stored remote control you want to use.
Make sure all the CH keys are stored.
WARNING: during navigation with a remote control keyboard ALL the stored
remote controls are inactive.
4
1 (Enter)
3 (Esc)
2 (∆)
(∆)
To make viewing and adjustment easier (avoiding the need to continuously
press the remote control), press the UP ↑ or DOWN ↓ key once to begin
slowly scrolling through the parameters.
This scrolling movement is faster if the UP ↑ or DOWN ↓ key is pressed twice.
To stop the scrolling, press ENTER.
To confirm your choice of parameter, press ENTER again.
To test any new setting, switch off the display and issue an opening command
using key
3
.
Navigation using a remote control keyboard is automatically disabled after 4
minutes of inactivity or by setting .
15.5.1 Additional RO level parameters that can be configured
(available with enabled)
Display Description Selections
available
C1, C2, C3, C4 - Selection of CH1, CH2, CH3, CH4 function of stored remote
control.
NO - No setting selected
1-3 - Opening command
1-4 - Closing command
1-5 - Step-by-step command
P3 - Partial opening command
LG - Command to switch the courtesy light on/off
1-9 - STOP command
If even just one (any) CH key of the remote control is stored, the opening or step-
by-step command is implemented.
NB: the (opening) and (step-by-step) options are available as alterna-
tives, and depend on the selection .
If 2-4 CH keys of a single remote control are stored, the functions matched in
the factory with the CH keys are as follows:
CH1 = opening/step-by-step command
CH2 = partial opening command;
CH3 =courtesy light on/off command
CH4 = STOP command.
RO
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Entrematic Ditec ION6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Entrematic Ditec ION6 in the language / languages: English as an attachment in your email.

The manual is 1,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info