749195
12
Zoom out
Zoom in
Previous page
1/48
Next page
12
IP2288EN
EN
7.5 Operation with virtual encoder
ION4-ION6 gearmotors do not require limit switches because they have a virtual encoder.
Mechanical opening and closing end stops must be installed.
The gate automatically slows when approaching the end stops.
WARNING: when the gate reaches the opening or closing limit stop, it reverses briefly to facilitate
manual release of the gearmotor.
7.6 Installation of optional accessories
For installation of the battery kit, refer to the SBU-IONSBU-BBU20-BBU65 (IP2254) manual.
For installation of the remote release handle, refer to the IONSBM and ASR2 manual.
For the installation of the limit switch kit, refer to the NES100FCM manual.
To position the limit switches, you can use the menu (visible by activating the additional
configurations ).
The display shows the status of the limit switches:
: opening limit switch configured and activated;
: closing limit switch configured and activated;
(both parts of display active): opening limit switch not configured and activated;
(no part of display active): closing limit switch not configured and activated;
(central part of display active): no limit switch activated;
With the limit switches configured as STOP (FA = SX; FC = SX) the anti-violation function is activated. When
the automation stopped open or closed, if the gate backs off releasing the limit switch, it is brought back into
position avoiding openings from external forces [energy saving must be disabled ES = OFF].
i
i
i
The limit switch kit is used to stop the gate before it reaches the opening and closing
mechanical stops.
With a limit switch installed, slowdown is carried out at regulated power to overcome
possible friction.
The battery kit guarantees operation if there is a power cut.
For advanced control of battery-powered operation, refer to the
EM menu.
The kit can be used to remotely release the gearmotor.
A microswitch guarantees safety.
When the handle is released, the control panel performs a reset
7.6.1 Magnetic limit switches
7.6.2 Battery kit
7.6.3 Remote release handle
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Entrematic Ditec ION6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Entrematic Ditec ION6 in the language / languages: English as an attachment in your email.

The manual is 1,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info