Manual Entrematic Ditec CROSS3E - IP1780 (page 12 of 42) (English, German, French, Italian, Portuguese, Spanish)

609363

Zoom out

Zoom in

1/42

CROSS3E - IP1780

2. REFERENCE TO ILLUSTRATIONS

The given operating and performance features can only be

guaranteed with the use of DITEC accessories and safety

devices.

2.1 Standardinstallationreferences(g.1)

[1] Radio

[2] Flashing light

[3] Key selector

[4] Geared motor + control panel

[5] Photocells

[6] Rubber edge - sensitive edge

[7] Opening and closing stop

[8] Connect power supply to an type-approved omnipole

switch with a contact opening gap of no less that 3 mm

(not supplied).

Connection to the grid is made with independent channels

and separated from the connections to the control and

safety devices.

2.2 Gearedmotorreferences(g.2-3)

[9] Casing

[10] Control panel

[11] Motor

[12] Transformer

[13] Manual release

[14] Safety micro

[15] Base plate

[16] Line fuse

[17] Pinion

2.3 Accessories

[18] BATK3 Battery kit

[19] LUXK3E Courtesy light kit

[20] CROSSCRN2 Rack

[21] CROSS3TC Chain drive kit

[22] CROSS3SF Photocell support kit

3. INSTALLATION

Unless otherwise specied, all measurements are expressed

in millimetres (mm).

3.1 Preliminary checks

Check the stability of the wing (derailing and lateral falls) and

the sliding wheels and that the upper guides do not cause any

friction.

The sliding guide must be securely xed to the ground for the

full length within the doorway and must have no irregularities

that could hinder the movement of the gate.

The opening and closing stops must be tted.

Note: make sure that the gate can not exit the sliding guides

and fall.

If the gate has slits, make sure they are covered to prevent

shearing points.

Safety device should be installed at the end of the wing to reduce

the collision force.

3.2 Base plate position

- Insert the anchoring brackets into the base plate [15] and

secure them by means of the nuts provided.

1. TECHNICAL DATA

CROSS3E

Power supply 230 V~ / 50-60 Hz

Absorption 1.2 A

Thrust 150 N

Max run

7 m

5.7 m [CROSS3TC]

Openingspeed 0.12 - 0.25 m/s

Closingspeed 0.12 - 0.25 m/s

Acquisition speed 0.10 m/s

Maxdoorweight 300 kg

Service class 3 - FREQUENT

Min number of

consecutive cycles

Intermittence

S2 = 15 min

S3 = 50%

Temperature -20° C / +55° C

Degreeofprotection IP24D

Control panel 73RP

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Entrematic Ditec CROSS3E - IP1780 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 6,03 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Entrematic Ditec CROSS3E - IP1780 Manual

Product: