492809
14
Zoom out
Zoom in
Previous page
1/26
Next page
URC 4 User’s Guide
Copyright
2012 Entone, Inc. All rights reserved
.
13
v2.5 for URC 4
Toggle Channel Up/Down Keys for TV/AUX
Every time user programs a new TV or AUX code, by default, the Channel Up and Channel Down
keys are working as normal for TV or AUX device. However it is possible to toggle ON/OFF these two
keys in their mode.
User can enable channel up/channel down keys feature for TV or AUX by pressing the following key
sequence:
Enable Channel Up/Down key for TV mode:
1. Press and Hold TV key for 5 seconds
2. Press Channel Up to enable it.
Disable Channel Up/Down keys for TV mode
1. Press and Hold TV key for 5 seconds
2. Press Channel Down to enable it.
Enable Channel Up/Down key for AUX mode:
1. Press and Hold AUX key for 5 seconds
2. Press Channel Up to enable it.
Disable Channel Up/Down keys for AUX mode
1. Press and Hold AUX key for 5 seconds
2. Press Channel Down to enable it.
Auto Search Procedures
If your device does not respond to the remote control after trying all devices codes listed for you brand, or if
your brand is not listed at all, try searching for your device code as follows:
1. Turn on your TV or your A/V device.
2. On the remote control, press a device mode key (i.e., “TV” or AUX) and hold for 5s. The device mode
key will light up.
NOTE: Use the “AUXmode key to program control of VCR, DVD player, cable box, satellite set-top-
box and audio device.
3. Press the POWER key once.
4. Aim the remote control at the device. Press either the CH UP” key or CH DOWN” key to do device
auto-scan:
a. Press the CH UPkey to start searching upward at an approx. 5 seconds interval for each device
code. The TV/AUX mode key will be on and blink every 5 seconds while in the device scan mode.
NOTE: In this search mode, the remote control will send IR codes from the library starting from the
lowest code set number to the end of code set for that device; OR
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Entone URC 4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Entone URC 4 in the language / languages: English as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info