Manual Engenius Network Management Software (page 42 of 51) (English)

619954

Zoom out

Zoom in

1/51

3.12. Block User

The administrator can utilize the Block User button at the User Tab to kick the

selected client out from its parent node. The blocked user will not be allowed to

reconnect to the node until they are unblocked.

In order to block a client, switch to the User Tab and select the desired client

from the user list, and then click the Block User button. The Block User window

would popup as illustrated

Hit the Execute button to add the selected client to the block list of the node

unit. Upon successfully add, some node unit requires a reboot for the changes to

take effect. For this purpose, administrator can click the Reboot button at the

bottom to complete the task.

3.13. Unblock User

On the other hand, unblock a client is similar to the block action. Select one or

more blocked client from the user list, and click the Unblock button. The

Unblock User window would popup as illustrated

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Engenius Network Management Software in the language / languages: English as an attachment in your email.

The manual is 5,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Engenius Network Management Software Manual

Product: