458104

Engenius EP 801 Manual

19
Zoom out
Zoom in
Previous page
1/152
Next page
~37~
Consequently, it cannot de-subscribe a handset from a group.
3. When an outside line or an intercom caller enters a group ID, all
handsets subscribed to this group will ring. The first handset to
answer will establish a link with the caller. Afterward, it is a one-
to-one call, not a one-to-many call.
Call Transfer
While a telephone call is in progress, you can transfer it between different
handsets or transfer to base.
Direct transfer from handset
1.
Press key to put the call on hold.
2.
Press XFER (Right) soft key, followed by the
destination handset ID or BASE (Left), then the held
call will be transferred directly.
After the call transferred to destination handset or
Base, the original handset will go back to standby
mode automatically.
Indirect transfer from handset
If you want to talk to the destination handset or Base
before the call transferred, you can follow with below
method:
1.
During the call, press key, followed by entering
the destination handset ID or BASE (Left).
2.
Press the or of the destination handset or
press the key of base to answer the intercom
call, you can now talk to the destination handset. After
the talking, press to end the intercom call, then the
destination handset is able to pick up the incoming call.
After the call transferred to destination handset or
Base, the original handset will go back to standby
mode automatically.
~38~
Direct transfer from base
1.
Press base key to put the call on hold.
Re:
When call on hold, the base In Use & speakerphone LED
will be flashing.
2.
Enter the destination handset ID followed by key,
the destination handset will ring, press
or key
of
destination handset
to pick up the call.
After the call pick up by destination handset, the base
will go back to standby mode automatically.
Indirect transfer from base
If you want to talk to the destination handset before the
call transferred, you can follow with below method:
1.
Press the destination handset ID followed by the base
key to intercom the destination handset.
2.
Press the or of the
destination
handset to answer
the intercom call, you can now talk to the destination handset.
After the talking, press base to end the intercom call,
then the
destination
handset will pick up the held incoming
call.
Notes: If the destination handset does not answer after handset
paging timeout, the call is routed back to the originating handset.
Phonebook Operations
1.
You can store up to 50 entries in the phonebook.
Each entry can contain a phone number or handset ID
(up to 26 digits) and a name (up to16 characters).
2.
To access the phonebook, press MENU (Right) soft
key, follow by “2”; or press scrolling key
while the
handset is in standby mode.
Main Menu
2.PhoneBook
SELECT BACK
3.
To add a new entry:
a.
Press ADD (Left) soft key.
b.
Enter the name when LCD prompts “Name?” Use
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Engenius EP 801 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Engenius EP 801 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 3,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Engenius EP 801

Engenius EP 801 User Manual - English - 152 pages

Engenius EP 801 Installation Guide - English - 2 pages

Engenius EP 801 User Manual - English, German - 152 pages

Engenius EP 801 Installation Guide - Dutch - 2 pages

Engenius EP 801 User Manual - French, Italian, Spanish - 152 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info