458104
18
Zoom out
Zoom in
Previous page
1/152
Next page
~35~
Advanced Operations
Handset Registration
1. If your handset(s) is purchased as part of a system, it has been pre-
registered with the base station at the factory.
2. If Handset ID as “00,” that means it is a new handset or the ID has been
erased. You need to register the handset with the base station.
3.
Registration:
a.
Press MENU-7 to enter the registration mode
b.
Press and hold the base’s Registration (REG)
button for 2 seconds until the and LEDs
lighting up and flashing, also the base will emit
ringing to remind you the base is in the registration
mode..
c.
Press handset key “1”, this completes the
registration process. The base station will assign a
handset ID between 12 and 19. The assigned ID
will be displayed on the handset LCD, indicating
successful registration.
d.
Repeat above steps for all additional handsets.
4.
De-registration:
a.
You can de-register the handset you’re using from
the base. De-registration will reset the Handset ID
to 00, erase the system security code, and free up
the old ID for future registration.
b.
After deregistration, the handset will not be able to
use the base to make or receive phone calls, nor
can it intercom other handsets.
c.
Press MENU-7 to enter the registration mode
d.
Press and hold the base’s REG button for 2
seconds until the and LEDs lighting up
and flashing.
e.
Press the handset number key “2”, this completes
the de-registration process. Upon successful de-
registration, the handset will show ”Please
~36~
register”.
Notes:
1. The base has a 30 second registration timeout starting from
pressing the REG button. The handset has a 12 second
registration timeout starting from the registration or de-
registration option has been selected. The base and handset
will automatically exit registration mode after timeout.
2. Repeat registration or de-registration process if unsuccessful.
Handset Group Subscription
1.
Up to nine handset groups (91-99) can be defined and
handsets can decide which group(s) they want to be
in.
2.
For example, Group 1 represents the Customer
Service Group, Group 2 represents the Sales Group,
and Group 3 is the Marketing Group. Suppose that
Handset 11 wants to receive incoming rings for all
Sales and Marketing related calls. Then handset 11
will need to “subscribe” to Group 2 and Group 3.
Call Settings
2.Group Setting
SELECT
BACK
3.
Group Selections:
a.
b.
Press handset MENU-4 to enter the Call Settings
menu
Press number “2”, handset enters group setting
menu.
c.
Press OPTION soft key and followed by “1” key to
subscribe the group (“9#”, :1~9). Enter 1~9.
d.
Repeat for all desired groups.
e.
Delete group selections by pressing OPTION soft
key and followed by “2” to Unsubscribe the group.
Notes:
1. The handset can change group affiliations at any time.
2. The base is not responsible for group assignments.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Engenius EP 801 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Engenius EP 801 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 3,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Engenius EP 801

Engenius EP 801 User Manual - English - 152 pages

Engenius EP 801 Installation Guide - English - 2 pages

Engenius EP 801 User Manual - English, German - 152 pages

Engenius EP 801 Installation Guide - Dutch - 2 pages

Engenius EP 801 User Manual - French, Italian, Spanish - 152 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info