729080
12
Zoom out
Zoom in
Previous page
1/36
Next page
23
Additional Base Station Features
Broadcast
A. Broadcasting from Base to Handset
1.
Broadcast to all handsets
a.
Press key on the base station to intercom
all registered handsets.
b. Hear bi-bi-beep while the initiating handset
broadcast all handsets within communication
coverage.
c.
The Broadcast LED will light up
d.
Press the key again and return to IDLE
mode
B. Broadcasting from Handset to Base
1.
Broadcast to all
Bases (DuraFon
PSL
-
BU)
a.
Press and hold the key on the handset to
broadcast all handsets and bases.
b. Start to speak the message to be broadcasted once
you hear the “beep” sound; the speakerphone of
the base will be opened up
.
c.
The Broadcast LED
on the bases
will light up
d.
Press the key again and return to IDLE
mode
Intercom Call
A. Intercom/2-Way from Base to Handset
1.
Press key on the base station to intercom all
registered handsets. The first handset to answer will
establish a voice link with the base.
2.
The INTERCOM LED will flash until a handset responds.
3. The base unit will page for 15 seconds, then terminate the page if
no handset responds.
4.
Before a handset answers, the INTERCOM can be cancelled from the
base by pressing again. However, once a handset answers,
only the answering handset can end the call.
11
From BASE 00
Volume: 2
SILENT
11
From BASE 00
Volume: 2
SILENT
11
Incoming page
From Ext#90
SILENT
24
Notes:
1. Due to for comply with existing DuraFon-HC, the display
does not match the behavior. For example, the intercom
call from base to handset, it displays “from Ext #90” instead
of “from Base xx”.
2. No support line detection feature in DuraFon PSL-BU base.
Even you set “Line Det” from an administrator handset
(Handset 10 or 11) via pressing MENU- 9 – 1 –enter base
ID(00–07)- 3 to enable Line Det.
3. In DuraFon PSL-BU base, no support “Auto Attendant.
4. In DuraFon PSL-BU base, no support “3-way Conference”.
5. In DuraFon PSL-BU base, no support “Announced call
transfer
6. In DuraFon PSL-BU base, no support “ call waiting” from
other telephone lines, due to it is only single line.
7. In DuraFon PSL-BU base, no support “Broadcast through
PBX”
Administrator Features
Handsets 10 and 11 are designated administrators. Both have the same
authority to perform base station administrative functions from their
handset menu selections. No password is required.
1.
Supports both DTMF and Pulse dialing(For DuraFon PRO
only
)
a. From an administrator handset (Handset 10 or 11 ), press
MENU- 9 1 –enter base ID(00–07)- 1 to select Tone or Pulse
dialing m
ode.
b.
Default is Tone dialing.
2. Administrator programmable Flash key timing(For DuraFon PRO
only
)
a. From an administrator handset (Handset 10 or 11), press
MENU
-
9
-
1
-
2
to select flash key timing
b.
9
-
level (100 ms
-
900 ms) timing selecti
ons, default=
6
00 ms
.
c. The default value (600 ms) works in most areas. Changing this
setting may result in Flash function not working. Change only
when you are certain the new value will work.
3.
Call Transfer
to PBX Extensi
on(For DuraFon PRO
only
)
a. When the DuraFon PRO is installed behind a PBX system, you
can pre
-
program the feature code of call transfer function.
b.
Need to adjust the Flash time to match your PBX setting.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Engenius DuraFon PSL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Engenius DuraFon PSL in the language / languages: English as an attachment in your email.

The manual is 1,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info