729080
10
Zoom out
Zoom in
Previous page
1/36
Next page
19
c.
Dial from display
d.
During the stand-by mode, you can enter the phonebook by
pressing or scrolling key
e.
Phone book transfer via air
i. Transfer specific phonebook to one handset or all
register
ed handsets
ii. Transfer all phonebooks to one handset or all registered
handsets
Re:For DuraWalkie, it can only store 2
-
digit handset ID(or Group ID).
1
3
.
Key Tone
a.
Three key
-
tone volume selections (high/low/off)
b.
Four key
-
tone type selectio
ns
1
4
.
Call Timer
(For DuraFon PRO
only
)
a. Display call time duration for current call during and
immediately after the call
15.
Call Transfer
a. Direct Transfer: transfer a telephone call to another handset
without announcement.
16.
PBX option transfer(For DuraFon PRO only)
a.
PBX transfer via air
b.
Transfer specific PBX option to one handset or all registered
handsets
c.
Transfer all PBX options to one handset or all registered
handsets
1
7
.
Base Selection(For DuraFon PRO only)
When enable from the handset menu, a handset user can manually
select the base which is the nearest one with user before making an
outgoing call.
18.
Repeater Operation
In order to get better range performance for handset to handset
calls(intercom and broadcast), install a repeater and make the calls
via repeater is able to extend the range of handset to handset calls.
Administrator Features (Register to PRO base)
Handsets 10 and 11 are designated administrators. Both have the same
authority to perform base station administrative functions from their
handset menu selections. No password is required.
20
1.
Supports both DTMF
and
Pulse dialing(For DuraFon PRO only)
a. From an administrator handset (Handset 10 or 11 ), press
MENU- 9 1 –enter base ID(00–07)- 1 to select Tone or Pulse
dialing mode.
b.
Default is Tone dialing.
2. Administrator programmable Flash key timing(For DuraFon PRO
only)
a. From an administrator handset (Handset 10 or 11), press
MENU
-
9
-
1
-
enter base ID(00
07)
-
2
to select flash key timing
b.
9
-
level (100 ms
-
900 ms) timing selections, default=
300 ms
.
c. The default value (300 ms) works in most areas. Changing this
setting may result in Flash function not working. Change only
when you are certain the new value will work.
3.
Call Transfer
to PBX Extension(For DuraFon PRO only)
a. When the DuraFon PRO is installed behind a PBX system, you
can pre
-
program the feature code of call transfer function.
b.
Need to adjust the Flash time
to match your PBX setting.
Re:
If loosing administrator handsets (handset 10 and 11), all
settings must be reset (reset the base and re-register all
handsets).
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Engenius DuraFon PSL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Engenius DuraFon PSL in the language / languages: English as an attachment in your email.

The manual is 1,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info