729077

Engenius DuraFon PRO Manual

34
Zoom out
Zoom in
Previous page
1/38
Next page
67
3. Press 2 to view, search, erase, edit and transfer the phonebook (see Phonebook).
4. Press 4 to set sound-related settings:
a. Press 1 to select ringer volume: Use or to scroll through 6 options:
Low, Medium, High, Vibrate, Vib and Ring, Off. Press SAVE (Left) soft key to save
selection. Default = High.
b. Press 2 to select ringer tone: Use or to scroll through 4 options: 0, 1,
2, and 3. Press SAVE (Left) soft key to save selection. Default = 0.
c. Press 3 to select key volume when a key is pressed: Use or to scroll
through 3 options: High, Low, and Off. Press SAVE (Left) soft key to save
selection. Default = Low.
d. Press 4 to select key tone: Use or to scroll through 4 options: 0, 1, 2,
and 3. Press SAVE (Left) soft key to save selection. Default = 0.
5. Press 5 to change handset settings:
a. Press 1 to Group Select: see Handset Group Subscription.
b. Press 2 to clear phonebook:
i. Press 1 and confirm to delete the entire phonebook.
c. Press 3 to change the power-up LCD display to show, e.g., customer name or
other greeting message:
i. Use or to move the cursor backward or forward to insert (to the
left of the cursor) or delete (the character above the cursor, or left of the
cursor if cursor is on the right of the last character).
ii. Enter characters using the Character Table and method discussed in the
Phonebook section.
iii. When finished, press SAVE (Left) soft key to save change.
d. Press 4 to change LCD display contrast:
i. Use or to scroll through values 1 to 8. Pick one that is most
suitable to you. Default = 6.
ii. Press SAVE (Left) soft key to save setting.
e. Press 5 to change the LCD backlight:
i. Use or to scroll through options: On, Off, and 20 Seconds.
Default = 20 seconds, meaning that the backlight is always on. The 20-
second option will turn off the backlight after 20 seconds of inactivity.
ii. Press SAVE (Left) soft key to save setting.
f. Press 6 to change Language:
68
i. Use or to scroll through options: English, Spanish and French.
Default = English, meaning the LCD display shows in English.
ii. Press SAVE (Left) soft key to save setting.
6. Press 6 to register or de-register handset: See Handset Registration.
7. Press 7 to set up the intercom or broadcast via repeater(see Repeater Setup).
8. Item 8 is to add new bases.
From an administrator handset (Handset 10 or 11) to set new
Base 01~07. Maximum bases is up to 8. Before adding a new
base, the Handset must be registered in master base(Base ID
=00).
a.
P
ress
REG
button on new Base.
b.
Use Handset 10 or 11 to Add base: Press
M
ENU
8
1
c.
Enter 01~07 (base ID)
9. Press 9 to change system and Line setting: See system setting and Line Setting.
… 34 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Engenius DuraFon PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Engenius DuraFon PRO in the language / languages: English as an attachment in your email.

The manual is 4,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info