Manual Engenius DuraFon PRO (page 32 of 38) (English)

729077

Zoom out

Zoom in

1/38

e-2. Press 2 to change the name of line, when calls coming, it will indicate the

calls came from which line.

i. Use or to move the cursor backward or forward to insert (to the

left of the cursor) or delete (the character above the cursor, or left of the

cursor if cursor is on the right of the last character).

ii. Enter characters using the Character Table and method discussed in the

Phonebook section.

iii. When finished, press SAVE (Left) soft key to save change.

f. Press 6 to change LCD display contrast:

i. Use or to scroll through values 1 to 8. Pick one that is most

suitable to you. Default = 6.

ii. Press SAVE (Left) soft key to save setting.

g. Press 7 to change the LCD backlight:

i. Use or to scroll through options: On, Off, and 20 Seconds.

Default = 20 seconds, meaning that the backlight on, will turn off after 20

seconds of inactivity.

ii. Press SAVE (Left) soft key to save setting.

h. Press 8 to change the Line selection:

i. Use or to scroll through options: On or Off. Default = Off,

meaning that you can not select the other available lines to dial.

ii. Press SAVE (Left) soft key to save setting.

i. Press 9 to change the PBX options:

i. Press ADD soft key to edit a PBX feature to be memorized and key in the

name of the PBX features just like editing a phonebook entry.

ii. Press SAVE (Left) soft key to save setting.

iii. Press OPTION and 1 following by entering PBX options mode, you can erase

the PBX option.

iv. Press OPTION and 2 following by entering PBX options mode, you can edit

the PBX option.

v. Press OPTION and 3 following by entering PBX options mode, you can

transfer the PBX options to other handset(s).

Re: To transfer PBX Options, both parties have to enter the PBX Option mode

firstly by following below:

For sending party, press 1 to enter sending mode.

 Either press TX ALL(left soft key) to transfer all PBX options to another

handset(s).

 Or press TX ONE (right soft key) to transfer a specific entry to another

handset(s).

 Press 2-digit handset ID or group ID, then select all PBX options or a

specific entry to be transferred(“00” means all handsets)

 During PBX options transferring, LCD shows “Sending”, and 2-digit

countdown on the LCD to indicate the numbers of PBX options which

are waiting for sending.

For receiving party, press 2 to enter receiving mode.

 When entering the receiving mode, LCD shows “Ready”.

 Start to receive PBX options, LCD shows “Get PBX options from Ext. # :

x ㎜ x”.

 When the PBX options is receiving, 2-digit countdown on the LCD

indicates the number of PBX options which are waiting to be received.

j. Press 0 to change Language:

i. Use or to scroll through options: English, Spanish and French.

Default = English, meaning the LCD display shows in English.

ii. Press SAVE (Left) soft key to save setting.

K. Press # to turn Broadcast On/Off.

i. Press On (Left soft key) to turn on the broadcast function (including the

broadcast of handset to handset and base to handset).

ii. Press Off(Left soft key) to turn off the broadcast function

Re: When broadcast setting “Off”, there is an icon indicated in the display, side

of the battery icon.

L. Press * to turn Name Tag On/Off.

i. Press On (Left soft key) to turn on the name tag function, when receiving the

incoming calls, the LCD will show the name which stored in phonebook.

ii. Press Off(Left soft key) to turn off the name tag function.

7. Press 6 to register or de-register handset: See Handset Registration.

8. Press 7 to set up the intercom or broadcast via repeater(see Repeater Setup).

Note:

1. Different PBX makers use different analog codes to control PBX

function, like call transfer, call park, etc.; Please refer to your PBX

maker’s manual for this information.

2. Errors may occur in PBX options and phonebook entries transferred

wirelessly due to interference. Please re-enter entry manually if

problems occur with an entry.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Engenius DuraFon PRO in the language / languages: English as an attachment in your email.

The manual is 4,82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Engenius DuraFon PRO Manual

Product: