Manual Energetics XT 1090 CROSSTRAINER (page 8 of 123) (English, German)

717777

Zoom out

Zoom in

1/123

Assembly

Unpacking the Unit

Carefully remove all parts from carton and inspect for any damage or missing parts. If damaged parts are

found, or parts are missing, contact your dealer immediately.

Locate the hardware package. The hardware is separated into steps. Remove the tools first. Remove the

hardware for each step as needed to avoid confusion.

Step 1

REAR RAIL ASSEMBLY

1. Put the 2pcs of 3/8”×19×1.5T Flat Washers (96) on the 2pcs of 3/8”×2-1/4” Hex Head Bolts (75) and

hand-tighten them, through the Top of the Rear Stabilizer Tube (Main Frame), into the Rear Assembly

(2) by using the 13/14 m/m Wrench (124).

2. Put the 4pcs of 3/8”×23×2T Curved Washers (104) on the 4pcs of 3/8”×3-3/4” Hex Head Bolts (77) and

hand-tighten them through the Front of the Rear Stabilizer Tube (Main Frame), into the Rail Assembly

(2) by using 13/14 m/m Wrench (124).

3. Then install Front Stabilizer Cover (59) with 2pcs of M5×15 m/m Phillips Head Screws (82) by using the

Phillips head screw driver (126).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Energetics XT 1090 CROSSTRAINER in the language / languages: English, German as an attachment in your email.

The manual is 2,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Energetics XT 1090 CROSSTRAINER Manual

Product: