591979

Energetics E-103 Exercise Monitor Manual

19
Zoom out
Zoom in
Previous page
1/212
Next page
GB
>> selection and setting of programs >> 019
Target heart rate (PULSE): After selecting the amount of calories, target
heart rate (PULSE) will blink on the display.
• Press the UP-key until the desired heart rate is displayed. To confirm the
setting press the SET-key.
Load prole – time/resistance columns 1 – 10 (LEVEL): After choosing the
target heart rate the display will move to the panel LEVEL. The set value for
the rst one of the 10 time increments will blink.
• Press the UP/DOWN keys until the desired load level appears. To confirm the
setting press the SET-key.
• The display changes into the second time increment. Repeat the procedure
above until all 10 time increments are preset.
Begin your workout
When all settings are complete the icon for the User Program will again blink.
Start the workout by pressing the function key ST/SP.
The program will start with the resistance level for the rst time increment
preset by the user.
The resistance can be adjusted during the workout. It can be reduced subject
to the lowest preset level of an individual time increment, or increased
subject to the highest preset level of an individual time increment. The user
preset time/resistance prole remains intact.
Settings during the workout
T
he resistance can be adjusted during the workout. The selected resistance
level is briey displayed.
Control your heart rate by adjusting the cadence or resistance.
User Program (P 7)
Features of this program
• The User Program allows you to design and store you own custom program
including load profile. Each one of the 10 time increments can be selected
and a load level set.
• You pre select the workout time, distance as well as the amount of calories
to be used and the target heart rate for your workout.
• Monitor the current heart rate during the workout and adjust the load ac
-
cor
dingly.
• The load can be controlled by adjusting the cadence or resistance.
Selection
P
ress the UP- or DOWN-function key
until the icon for the User Program
blinks in the program selection bar.
To conrm the setting press the
SET-key.
Settings
W
orkout time (TIME)/workout distance (DISTANCE): After selecting the
User Program (P 7), TIME will blink. You can then choose to either set the work-
out time or distance (DISTANCE). The computer will skip distance if a time
was entered. If no time is chosen the distance setting is activated.
• Press the UP-key until the desired workout time is displayed. To confirm the
setting press the SET-key.
CALORIES:
After setting the workout time or distance, CALORIES will blink on
the display.
• Press the UP-key until the desired amount of calories to be burned is dis
-
pla
yed. To confirm the setting press the SET-key.
PROGRAMSCAN
SPEED TIME DISTANCE CALORIES PULSEKM
… 19 …


Need help? Post your question in this forum.

Forumrules
1

Forum

energetics-e-103-exercise-monitor

Reset search

  • My E-103 has been disconnected for a while. When I try to reconnect it the computer does not respond. I pedal, I press buttons, but nothing happens. Is the electric cable is faulty or is there an 'on' button that I have not been able to find? The manual says to make sure the equipment is turned on, but does not indicate any switch for this purpose. Submitted on 12-4-2020 at 09:44

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Energetics E-103 Exercise Monitor at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Energetics E-103 Exercise Monitor in the language / languages: English, Dutch, Danish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 5,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Energetics E-103 Exercise Monitor

Energetics E-103 Exercise Monitor User Manual - German, French, Italian, Polish, Spanish - 238 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info