807504

Enduro LI1210 Manual

18
Zoom out
Zoom in
Previous page
1/28
Next page
ENDURO® LI1210 18 Ref: LI1210-UM-TKI-0821-Rev.A
Tighten the two battery terminals securely (pay attention to plus (+) and minus (-)
polarity!) And ensure a good connection between the battery, battery terminals and
cables.
Please pay attention to the polarity and do not short-circuit the positive
(+) and negative (-) terminals of the battery!
The LI1210 battery may not be connected in series or parallel with any
other battery to get a higher voltage or bigger capacity!
Before using the LI1210 Lithium-ion battery for the first time, it should
be fully charged!
OPERATION – THE CHARGER
ONLY use the supplied ENDURO® battery charger (model: LI1210/GJS150)
to charge the battery. The battery may be charged by the output
terminals.
With CPU control and pulse width modulation (PWM) technology, the charging current
and output voltage is controlled accurately to ensure a fully-charged battery and avoid
over-charging. When charging over the battery terminals, the performance of the battery
may lag.
Do not charge the battery at a temperature below 0 degrees Celsius.
The charger will get hot during charging. Make sure that the charger is
used in place with good ventilation and free of dust. Have at least 10cm
space around the charger.
This charger is not designed as power supply.
The charger should not be opened. Any attempt at modification or repair by the user will
entail the loss of your guarantee.
Charging the battery:
After every use (and before storage) charge the battery immediately.
Check the plug of the charger for damages or loose wires.
Connect the plug of the charger to the 12V DC input jack of the battery and then
connect the charger to the AC power (100-240V, 50/60Hz).
The LED on the charger will light in red, and the charging process will start. The
battery will charge in steps. When the battery is fully charged, the LED will light up
green.
MAINTENANCE
In general the LI1210 battery is maintenance-free.
The LI1210 battery can be cleaned with a damp cloth. Do not use any aggressive
cleaning chemicals.
Routinely check the battery’s charge status.
Consider replacing the battery with a new one if you note either of the following
conditions:
The battery run time drops below about 80% of the original run time.
The battery charge time increases significantly.
Battery terminal
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Enduro LI1210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Enduro LI1210 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0.5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info