Manual Enduro LI1210 (page 17 of 28) (English, German, Dutch, French)

807504

Zoom out

Zoom in

1/28

ENDURO® LI1210 17 Ref: LI1210-UM-TKI-0821-Rev.A

 Do not discharge the battery while the battery is charging.

 Do not expose the battery/charger to harsh chemicals.

 Keep the battery/charger away from children and animals.

 Do not expose the battery/charger to flame or other high heat sources.

 Charge battery regularly.

 It is important to maintain at least 25% of your battery power when not in use.

 Do not expose the battery/charger in a place with heat or with direct sunshine.

 The chemical reaction during charging and discharging a LiFePO4 battery is not fully

reversible. Due to that, LiFePO4 batteries loose capacity during their life-span. This is

normal and not a manufacturing nor production fault.

INSTALLATION

FOR PROFESSIONAL INSTALLATION ONLY. These instructions are for

general guidance. Installation procedures may vary depending on your

situation

The LI1210 battery should not be used or installed by people, who don’t

have experience or knowledge how to use it. The user must have enough

competency to install it. Otherwise he must ask for help by qualified

personnel.

Unpack all the components and check for the presence of all parts (see package contents

list). Make sure the goods meet your requirement.

Check if the battery or charger isn’t damaged during the transport.

The charger and the battery should be put in indoor environment with good ventilation

and good cooling system. Do not expose to humid, high temperature, flammable,

explosive gas environments.

Find a suitable place for LI1210 battery and charger such as a storage area, under a seat

or a bed. Make sure there is sufficient ventilation all around. A space of at least 10cm

should be allowed.

Make sure that the battery and/or charger cannot be completely covered

by cloths or other isolation materials!

Mount the battery fixation bracket with the supplied screws

M3.5x18 on the bottom of the caravan. After mounting, the

battery “snaps” firmly into the bracket.

The plus (+) and minus (-) cables can be fixed to the output

terminals of the battery with the supplied M8 washers and bolts.

The output terminals of the battery must be covered by the

supplied isolation caps.

The plus (+) and minus (-) cables can also be connected via

quick clamps (not supplied) to the supplied DIN battery terminals.

Quick clamp

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Enduro LI1210 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0.5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Enduro LI1210 Manual

Product: