589909
6
Zoom out
Zoom in
Previous page
1/14
Next page
109
USAGE-PRESSURE SETTING USAGE-PRESSURE SETTING
USAGE - Pressure Setting
NOTE: Always check to make sure that the rubber gasket and the pressure regulator
valve are clean and positioned properly before EACH use. Refer to p.19 for all steps.
1. Plug the pressure cooker into the wall outlet.
2. Place the removable cooking pot inside the pressure cooker. Then place food inside
it. Always use 1 cup (8 oz) of liquid when cooking on this setting.
3. See Diagram on right. Place the lid on the pressure cooker
and turn it counter-clockwise until it locks in place. You will
hear the locking pin click into place.
4. Turn the pressure regulator knob located on the lid of the
appliance to PRESSURE.
5. Next, select the desired cooking mode by pressing on the
HIGH or LOW button on the control panel, located on the front of the appliance. The light
on the selected button will flash and the digital display will show 00:01 for 1 minute of
cooking time.
6. Keep pressing the button until you reach the desired time. You can also press and
hold the button.
7. When the time is set, press the START/STOP button to start the cooking process. The
indicator light will stop flashing. To cancel or reset, press the START/STOP button again.
8. If you forget to set the desired cooking time or do not press the START/STOP button,
the digital display will go back to a default display of 00:00 after 30 seconds.
9. The digital display will enter a waiting mode (the first 2 digits of the display will move).
The display will continue to show the entered cooking time until the right amount of
pressure is reached, depending on the amount of food and liquid used. It will not count
down right away.
10. When the pressure is reached, the Floating Valve will rise and the cooker will begin
counting down the minutes.
11. Once the cooking time has elapsed, you will hear a series of periodical beeps.
The pressure cooker will automatically enter a WARM function.
12. The beeping will continue until the Floating Valve drops and unit no longer detects
any pressure. To manually drop the valve, perform the Quick Pressure Release by
turning the Pressure Regulator knob towards steam in short bursts until the all of the
pressure is released.
TO
LOCK
13. You may also turn the unit off by pressing the START/STOP button, the beeping will
stop. You have to wait until all of the pressure is released (the Floating Valve will
drop) or perform the Quick Release as described above in #12.
14. Once all of the pressure is released, unlock and carefully lift the lid. Use caution
when removing the lid. Keep your face away from the cooker as steam will escape
as soon as the lid is opened.
CAUTION:
WHEN MANUALLY RELEASING PRESSURE BY TURNING
THE PRESSURE REGULATOR KNOB, HOT
STEAM AND DROPLETS OF WATER WILL BE EJECTED. QUICK PRESSURE RELEASE SHOULD NOT BE
PERFORMED WHEN PRESSURE COOKING STEWS, SOUPS, OR ANY OTHER RECIPE THAT INVOLVES LARGE
AMOUNTS OF LIQUID, AS IT WILL EJECT FROM THE PRESSURE RELEASE KNOB, RESULTING IN SERIOUS
INJURY.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Emson Big Boss at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Emson Big Boss in the language / languages: English as an attachment in your email.

The manual is 0,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info