691901
13
Zoom out
Zoom in
Previous page
1/16
Next page
EmpirBus Connect-50 User manual Ver. 1.33 12/14
8. WiFi!settings!
WIFI factory default SSID: CONNECT- 50 ”unit serial number”
WIFI factory default PW: SECRET000
To change Wifi settings connect to the unit’s Wifi, open a web browser and navigate to 192.168.1.1.
Factory default USERNAME: admin
Factory default PW: admin
Resetting the Wifi to factory default settings is done using the touch button on the Connect-50:
1. Press and hold Man ON/OFF until P0 is visible on the display.
2. Use the right arrow button and step to P6.
3. Press Man ON/OFF button once.
4. Use the right arrow button and step until v03 is visible on the display.
5. Press Man ON/OFF button once, CFO becomes visible in the display.
6. Press and hold Man ON/OFF until FAC is visible in the display, Wifi settings are now
reset to factory default.
7. Exit by pressing the Reset / Auto button three times.
9. Product!specifications!
See table 4.1 for model specification and hardware support
Output
Fuse setting
Output minus (-)
1, 5, 8, 10 A
4 channels 6 A minus
Digital input
12V power peak/average:
Signal Drive output
170mA / 1mA (closed), <0.1mA (open)
Internal resistans = 14,85kohm
50mA positive/negative (se 6.1.8 for internal voltage drop)
Analog input
Volt
Resistance
0–18V +/-1%
0–1500 ohm +/-5%
Communication
CAN-bus
Optional CAN-bus
Optional RS485!
NMEA 2000
Galvanic isolated, configurable protocol
Galvanic isolated, configurable protocol
Power supply
Maximum current
Power consumption (power save)
Supply voltage (12V models)!
50A
1.5mA
9-16VDC!
Connectors
NMEA 2000
Channels
Power supply
Micro 5pin M12 Male
Molex MX150L 16 circuits
M6 bolt
Environment
Ambient temperature
Enclosure!
-20 to +55 degrees Celsius (dry)
Ingress Protection IP65, Polycarbonate
1
Physical data
Size
Weight!
229 x 106 x 41 mm
0.4 kg!
1
Exposure to solvents and/or water above 60°C may cause cracking on polycarbonate.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for EmpirBus Connect-50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of EmpirBus Connect-50 in the language / languages: English as an attachment in your email.

The manual is 2,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info