Manual Emmeti X-EVO - XX17W43 Wall indoor unit (page 17 of 40) (English)

667120

Zoom out

Zoom in

1/40

GBGB

6. INSTALLATION OF THE INTERNAL UNIT

Use the bracket to support the unit, leaving enough space for connecting

pipes and cables

6.4 Connecting the refrigerant pipes

Depending on the position of the hole in the hole in the mounting plate,

choose the side from which the tube will come out of the unit.

If the hole in the wall is behind the unit, do not cut the removable panel.

If the hole in the wall is to the side of the inside unit, cut the removable

panel with the tool.

Removable panel

- Connect the refrigent pipe

Note: For details on connecting the fridge circuit refer to the manual of

the outdoor unit.

6.5 Connection of the condensate discharge pipe

To ensure proper drainage, the pipe must be attached to the same side

from which the coolant pipe comes out.

You have to connect a drain pipe to the hose end of the drain pan of the

internal unit to carry the drain into the requested place, both outside and

inside the house.

- Insert a drain pipe of condensation to the hose end (Ø16 mm)

- Use a plastic pipe rigid enough to avoid squashing on the curvatures.

- Fix the pipe to the drain and block it with a clamp-band

- Insulate with an insulated sheath of 9mm thickness the whole pipe

inside the house to avoid drip as a consequence of an external con-

densation of the pipe.

- Verify the absence of siphons or counterslopes next to the internal unit

drain.

Attention

Before pipes connection of the refrigerant circuit you should verify the

right operation of the drain. Pour some water into the drain pan placed

under the fins battery of the internal unit and verify its right outflow.

Attention

Place the condensation water drain in order not to create damages to

people or things.

It is advisable to maintain a visual check of the drain at the end of the

pipe or to add a transparent piece into the same pipe when it goes into

a not inspectable drain.

Do not install the drain as shown below

At the hose of the condensate drain pan of the indoor unit, it is neces-

sary to connect an exhaust pipe to convey the condensate to the desired

location, both inside and outside the house.

Refrigerant oil

Flare-nut

Open-ended

spanner

Torque wrench

5 cm

It becomes

high midway.

The end is

immersed in

water

It waves. The gap with

the ground is

too small.

There is the

bad smell

from a ditch

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Emmeti X-EVO - XX17W43 Wall indoor unit in the language / languages: English as an attachment in your email.

The manual is 7,31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Emmeti X-EVO - XX17W43 Wall indoor unit

Emmeti X-EVO - XX17W43 Wall indoor unit User Manual - German - 40 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Emmeti X-EVO - XX17W43 Wall indoor unit Manual

Product: