499619
5
Zoom out
Zoom in
Previous page
1/10
Next page
5 | ENGLISH
1. Wire the dimmer for the desired application:
a. Figure 3: Dimmer A as a stand-alone device
b. Figure 4: Dimmer A with extension units:
Example of connection with a push-button B, an extension insert C and
an extension TELE insert D.
2. Install the dimmer (Figure 2).
Note:
A neutral conductor is required if the extension TELE insert is used
Caution:
The plug prongs on the rear of the sensor cover can become bent if tilted excessively.
Therefore always plug the sensor cover in as straight as possible.
3.0 How to mount the sensor cover
The plugs on the rear side of the sensor cover can become bent if tilted excessively.
For this reason, always hold the sensor cover as straight as possible when inserting
and removing.
Figure 5
Attach the cover together with its frame to the flush-mounted insert. When attaching
the sensor cover, turn it so that the recess at the back is pointing downwards,
and let it slip onto the pin (5A) of the insert. Once it has been attached, the plug at the
back provides the connection for supplying power and exchanging data.
4.0 How to put the dimmer into operation
After installation:
1. Switch on the mains voltage.
2. The connected luminaires flicker for around ten seconds and then switch off
again.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eminent EM6620 e-Domotica at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eminent EM6620 e-Domotica in the language / languages: English as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Eminent EM6620 e-Domotica

Eminent EM6620 e-Domotica User Manual - German - 10 pages

Eminent EM6620 e-Domotica User Manual - Dutch - 10 pages

Eminent EM6620 e-Domotica User Manual - French - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info