499611
8
Zoom out
Zoom in
Previous page
1/13
Next page
8 | ENGLISH
b. If not: Run a black switching wire to the first wall switch and connect this
to the white switching wire.
9. Select one of the options below depending on your situation.
a. Multiway switching situation using all wires:
If you use two light switches on the wall: Connect one of the two the
black switching wires to the switching wire coming from the second wall
switch.
b. Multiway Switch and Single switch situation: If you use only one light
switch on the wall: Connect a terminal block to the second non used
black switching wire from the EM6557.
10. Make sure all wires are fully inserted into the terminal or wire nuts.
11. Turn on the main switch to enable the mains again.
12. Test whether the device works by pressing the button on the switch. (be careful
and avoid touching the wires). The LED on the switch will be lit. The connected
device will also be turned on.
13. Do not close the junction box yet.
3.2 Assigning the Built-In switch to the e-Domotica e-
Centre
Note that you might need to enable the checkbox ‘Normal/High Power just below the
‘Include’ button on the ‘e-Domotica Products’ page of your e-Centre. This option is
available to be able to include devices on a greater range. For example, your e-Centre
is located in the living room and the EM6557 is located in the attic of your house.
1. Make sure your computer is completely started.
2. Open your computer’s web browser.
3. Enter “http://ecentre” in the address bar of your web browser and press the
‘Enter’ key on your keyboard.
4. The webpage of the e-Centre will be shown. If the Wizard is started, click ‘Exit
Wizard’.
5. Go to thee-Domotica Products’ page.
6. Click the ‘Include’ button. The e-Centre will start to search for new e-Domotica
devices.
7. Press the button on your new switch three times.
8. A message will appear: ‘Product found’.
If the device is not found, press the ‘Exclude’ button in the e-Centre’s webpage and
then click the button on your switch. After this procedure you can add the new device
correctly.
9. Give the connected and found device a name, choose a location and click ‘Save’.
10. The switch has been added to the e-Centre. The e-Centre will now be able to
control the switch.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eminent EM6557 - e-Domotica at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eminent EM6557 - e-Domotica in the language / languages: English as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Eminent EM6557 - e-Domotica

Eminent EM6557 - e-Domotica User Manual - German - 14 pages

Eminent EM6557 - e-Domotica User Manual - Dutch - 14 pages

Eminent EM6557 - e-Domotica User Manual - French - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info