499606
6
Zoom out
Zoom in
Previous page
1/10
Next page
6 | ENGLISH
10. You can now put the sensor in the wall switch box. We suggest to disable the
mains by turning off the main switch of the house when putting the sensor in the
wall switch box.
4.0 Removing the sensor
In some cases it might be necessary to remove (exclude) the sensor from your e-
Centre. Follow these instructions to do so:
1. Make sure your computer is completely started.
2. Open you computer’s web browser.
3. Fill in “http://eCentre” in the address bar of your web browser and press the
‘Enter’ key on your keyboard.
4. The openings screen of the Eminent e-Centre will be shown. If the Installation
Wizard starts, click ‘Exit Wizard’ to continue.
5. Click the ‘Exclude’ button.
6. Press the button on your sensor three times.
7. The device has now been deleted, a message will appear to confirm this.
5.0 Frequently Asked Questions
Q: I cannot open http://ecentre using my internet browser?
A: Go to your e-Centre touchscreen and press ‘Devices’, press ‘Settings’ and check
if your e-Centre has received an IP address (wired or wireless).
If not, check the settings of your e-Centre using a network cable.
If yes, open the page using the IP address. For example, if the IP address on
screen is 192.168.1.30, you can enter this address in the address bar of your
browser like this: http://192.168.1.30 . Press ‘Enter’ on your keyboard to open
the page.
Q: What is the maximum wireless range of my e-Domotica devices?
A: Thanks to the network’s repeating option (amplifiers), the wireless range of the
e-Domotica devices is virtually unlimited. Both the EM6514 sensor and the
EM6556 mini switch act as a repeater. Without repeating, the maximum wireless
range indoor is approximately 15 meters. You can optimize the wireless range by
adding an extra EM6556 mini switch, EM6550 switch or EM6551 dimmer, and
then use the ‘Optimize’ function in the e-Centre’s webpage.
Q: What kind of LED indications does the sensor have?
A: The sensor is not included to a system, out of the box. The LED will flash on and
off at 2 second intervals.
Once the sensor is included to a system: the LED will be off when the sensor is
turned off and lit when the sensor is turned on, by pressing on the button.
When a overload state occurs and the sensor is ON, the LED will flash on and off
at 0.5 second intervals. The on/off button is disabled in this state. The overload
state can be cleared by disconnecting and reconnecting the wiring.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eminent EM6514 e-Domotica at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eminent EM6514 e-Domotica in the language / languages: English as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Eminent EM6514 e-Domotica

Eminent EM6514 e-Domotica User Manual - German - 9 pages

Eminent EM6514 e-Domotica User Manual - Dutch - 9 pages

Eminent EM6514 e-Domotica User Manual - French - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info