499606
4
Zoom out
Zoom in
Previous page
1/10
Next page
4 | ENGLISH
2.2 Use case example: Change your (living) room into the
right ambience
Want to set your room into the right ambience? No problem! Use an EM6514 Wall
Switch Sensor in your (living) room to trigger your self-defined scene. For example,
this scene can power up your TV, dim the lights near the TV and switch off other lights
in your room.
The benefits of doing this:
Using your existing wall switch to enable more devices instead of only a ceiling
light.
Reduce energy consumption by disabling several devices and lights using the
same existing wall switch sensor.
Get in the right mood with one click, instead of switching on/off other devices and
lights manually
3.0 Installing the sensor
3.1 Installing the wall switch sensor into a wall switch box
Warning!
If you do not have enough electrical skills, do not continue and let a certified
electrician do the job for you. Otherwise you might get injured and/or electrocuted.
If you do have the skills, be very careful. Take notice of the following
Disable the mains of your house by turning of the main switch, before you
continue. Otherwise you might get injured and/or electrocuted.
In some older houses the colors of the wiring can be different. In some situations
not all wires are available and you might need to pull an extra wire from the
nearest distribution box.
Do not install the sensor near combustible substances or any source of heat, e.g.
fires, radiators, boilers etc.
Do not install the sensor facing direct sunlight, humid or dusty places
1. Take the sensor out of the packaging.
2. Open the wall switch box where you want to install the sensor.
3. Check if the power is really switched off (for example by using a voltage tester)
4. Disconnect the neutral wire and live wire from the sensor.
5. Connect the dry contact cables (white) to the wall switch
6. Connect the blue neutral wire of the mains with a N input of the sensor and
tighten the screw.
7. Connect the 230v live wire of the mains with the L input of the sensor. Often this
wire has a brown color.
8. Make sure all wires are fully inserted into the sensor.
9. Turn on the main switch to enable the mains again.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eminent EM6514 e-Domotica at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eminent EM6514 e-Domotica in the language / languages: English as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Eminent EM6514 e-Domotica

Eminent EM6514 e-Domotica User Manual - German - 9 pages

Eminent EM6514 e-Domotica User Manual - Dutch - 9 pages

Eminent EM6514 e-Domotica User Manual - French - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info