701980

Emerio PH-122174 Manual

7
Zoom out
Zoom in
Previous page
1/45
Next page
CLEAN THE BOILER AT REGULAR INTERVALS
Release the residual steam in the boiler when you use up. Cut down the power, after the appliance
refrigeration enough put up one side of the cleaning valve(10), turn the cleaning valve(10)(do not lie
flat the appliance when you open the cleaning valve, otherwise the water will leakage).Then fill
appropriate water into boiler, insert the boiler cleaning brush and turn the cleaning brush to clean
the boiler, then waggle the equipment softly and pour-out the water. Repetition clean 2-3 times, then
assemble the cleaning valve back and screw it tightly.
SUGGESTIONS
- Divide the washing according to the correct ironing temperatures. Start by ironing those garments
that require a lower temperature. For fuller details, refer to the chart at end of this booklet.
- Fabrics such as velvet and wool, and accessories such as gloves, handbags, etc. will regain their
brand-new look and texture by simply passing the iron near the surface of the fabric and pressing the
steam button.
- Imprints left in carpets by furniture can be removed by applying steam on the parts where the pile
is crushed and the brushing lightly.
If the carpet is made of synthetic material, do not select a high temperature.
How to get a professional ironing finish
A normal iron generates only a small quantity of steam. In this case it is necessary to products steam
constantly in order to eliminate crease in the fabric being ironed.
A professional ironing system works rather differently. The fabric is first made damp by the steam and
then, in a second phase, dry-ironed in the normal way. This means that every. Tiniest crease is removed
and your garments are ironed to perfection.
In the first phase (steam-damping of the fabric),hold the iron about 20 cm above the fabric and press
the steam(2). Pass the iron over the garment in a circular movement so that the powerful jet of steam
damps the fabric. Lightly creased garments require only a few moments of steaming. While very heavy
fabrics or garments with particularly difficult creases must be damper, so steam must be applied for a
few seconds more.
During the second phase (dry ironing), check that the thermostat knob is in the correct position for the
type of fabrics; release the steam button(2) and dry-iron the garment. The special ironing plate will
prevent the fabrics from becoming shiny. Using this ironing technique, and following the suggestions in
the chart below, you will find it easy to give your garments a really professional ironing finish.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Emerio PH-122174 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Emerio PH-122174 in the language / languages: English, German as an attachment in your email.

The manual is 2,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info