701954

Emerio MG-201798.1 Manual

14
Zoom out
Zoom in
Previous page
1/36
Next page
MG-201798.1 EN
DESCRIPTION
1. Hopper plate
2. Motor housing
3. ON/OFF/ Reverse switch
4. R / ON switch
5. Locking knob hole
6. Locking knob
7. Food pusher
8. Head
9. Feed screw
10. Cutting plate (fine)
11. Cutting plate (medium)
12. Cutting plate (coarse)
13. Fixing ring
14. Cutting blade
15. Sausage attachment
16. Kibbe attachment
17. Head inlet
FOR THE FIRST TIME
1. Check that voltage indicated on the rating label corresponds to the mains voltage in your home.
2. Wash all parts (except body) in warm soapy water.
3. Before plugging in, ensure the “ON/OFF/ Reverse” switch is turned to "OFF" position.
FOR USE
ASSEMBLING
1. Place the feed screw into the head, long end first, by turning the feed screw slightly until it is set into the
motor housing (fig.1).
2. Place the cutting blade onto the feed screw shaft with the blade facing the front as illustrated (fig.2). If it is
not fitted properly, meat will not be ground.
3. Place the desired cutting plate next to the cutting blade, fitting protrusions in the slots (fig.3).
4. Support or press the centre of the cutting plate with one finger then screw the fixing ring until tight with
another hand (fig.4). Do not over tighten.
5. Holding the head and insert it in the inlet with one hand, tighten it by turn the LOCKING KNOB clockwise
to secure the head (fig.5, 6).
6. Place the food chute on the head and fix into position.
7. Locate the unit on a firm place.
8. The air passage at the bottom and the side of the motor housing should be kept free and not blocked.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Emerio MG-201798.1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Emerio MG-201798.1 in the language / languages: English, German, Dutch, Swedish, Finnish as an attachment in your email.

The manual is 1,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info