701417

Emerio FH-117198 Manual

8
Zoom out
Zoom in
Previous page
1/41
Next page
- 7 -
5. Timer button
Under working condition, you can press button “ ” to set timer.
Press the button “ ” once, the appliance enters the timer setting mode. You can press “ ” to adjust the
timer from 0 – 8H (each press changes the value of one hour and “0H” means no timer). The corresponding timer
value will be shown on the digital display. The set timer will be activated in 5 seconds without any other operation
and then the digital display will show back the room temperature. The icon “ ” on the display indicates the
timer has been set. When the timer is counting down to 0 (not shown on the display), the appliance will stop
working automatically (a beep sound will be sent out) and enter standby mode.
Note:
If no operation for 10 minutes, the digital display and indicator light will go out. Press once any one of the
buttons can make the display and indicator light come back.
The heater will remain hot for some time after it is turned off; handle it with care.
REMOTE CONTROL
This unit has a remote control. One piece of CR2025 battery should be used for it. The remote control can set
the desired temperature by pressing adjustment button “ ” or “ ”, which cannot be adjusted on the
appliance’s control panel, besides, other functions of the remote control buttons are the same as of the buttons
on the control panel. Follow the illustration on the back of the remote control to place or remove battery. Pay
attention to the battery polarity when placing the battery.
SAFETY SYSTEM
The appliance has a safety system which automatically switches off the unit when overheated.
If overheating occurs, switch off the appliance, remove the plug from the socket, and let it cool down for at
least 30 minutes. Put the plug in the socket and switch on the heater.
This heater is equipped with a tilt protection safety device. For safety reasons, the unit will automatically
switch off the power if it is put on unstable or uneven surfaces or if it is tilted accidentally.
CLEANING AND MAINTENANCE
Before maintaining, please unplug the appliance and make sure the heater has cooled down completely.
Please use soft cloth to wipe the dust on the appliance’s surface.
Do not use gasoline, thinner and any other abrasive cleaners to clean the appliance, as these can damage
the surface of appliance.
Make sure the appliance is cooled and dried before packaging. Store it in dry and ventilated places.
TECHNICAL DATA
Operation voltage: 220-240V ~ 50Hz
Power: 2000W
GUARANTEE AND CUSTOMER SERVICE
Before delivery our devices are subjected to rigorous quality control. If, despite all care, damage has occurred
during production or transportation, please return the device to your dealer. In addition to statutory legal rights,
the purchaser has an option to claim under the terms of the following guarantee:
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Emerio FH-117198 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Emerio FH-117198 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info