701417

Emerio FH-117198 Manual

7
Zoom out
Zoom in
Previous page
1/41
Next page
- 6 -
OPERATION
Plug in the appliance into an appropriate electrical outlet. Turn on the appliance by pressing the power switch.
A beep sound will be heard. The appliance is standby with the current room temrature illuminating on the digital
display. (Numeral of temperature shows on the side and “℃” shows on the top.) Press the on/off button on the
control panel to start setting your heater.
1. On/off button
Press the button “ ” to run your heater in ventilation mode with icon “ ” illuminating on digital display.
The digital display shows the room temperature. Press the button “ ” again, the appliance will enter into
standby condition. If the appliance is heating, it will count down 30 seconds before turned into standby mode,
in order to cool the inside off and protect the components. The icon “ ” will flicker on the display, and one
beep sound will be heard when the appliance finishes the cooling and enters into standby. (If you press into the
ventilation mode during this count-down and then press the button “ ” again, the appliance will resume the
count-down unfinished last time before the appliance goes into standby.)
2. Adjustment button (“ ” or “ ”only on the remote control)
You can press the button “ ” or “ ” on the remote control to adjust temperature setting. The temperature
range is from 10℃ to 49℃. The set temperature flashes for several seconds and then the display shows again
the room temperature. The heater will automatically stop working when the set temperature is reached and
resume working when the room temperature is lower than the set temperature.
3. Power setting button
Under working condition, you can press button “ ” to switch the power setting between low heating power
and high heating power.
- Low heating power: Icon “ ” will be shown on the digital display.
- High heating power: Icon “ ” will be shown on the digital display.
The heater works on low heating power when the room temperature is 0-2℃ lower than the set temperature.
The heater works on high heating power when the room temperature is 4-5℃ lower than the set temperature.
4. Oscillation button
Under working condition, you can press button “ ” to activate or deactivate the swing function. The digital
display will show icon “ ” lighted on when swing function is activated.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Emerio FH-117198 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Emerio FH-117198 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info