Manual Emax CRA 6322-1 (page 7 of 16) (English, German, French, Italian, Spanish)

553585

Zoom out

Zoom in

1/16

 G E N E R A L  I N F O R M AT I O N 

Carefully read this use and maintenance manual, where

important information about installation, use and mainte-

nance safety is provided. Keep this manual for future ref-

erence. Any installation operation (electric connections)

shall be performed by specialized personnel, in compli-

ance with all standards and regulations in force.

 S A F E T Y WA R NI N G 

The use of flat-bottomed pots, with a diameter equal to

or slightly bigger than the heated area, is recommended.

(Fig.5). Do not use pots that have a rough base, in order

to prevent the hob thermal surface from being scratched.

This appliance is not intended for use by children or in-

firm people without supervision.

IMPORTANT

- Avoid the overflow of liquids by reducing the heat

supply when boiling or warming liquids.

- Do not leave any heating element switched on, if

there are no pots, or if the pots are empty.

- Once cooking is completed, turn the concerned

heating element off, by using the control shown be-

low.

- This appliance is not intended for use by people

(children included) with limited physical, sensorial or

mental abilities, or lacking of experience and knowl-

edge, unless they are supervised or well instructed

about the use of the appliance, by a person who is

responsible for their safety.

- Children should be supervised to assure that they

do not play with the appliance.

- If the hob surface is cracked, turn the appliance off

and disconnect it from the electric network , so as to

avoid the possibility of electric shock.

INSTALLATION INSTRUCTIONS

These installation instructions are intended for a special-

ized installer and are meant as guidelines for the hob

installation, adjustment and maintenance, in compliance

with any regulations and standards in force. If a built-

in oven or any other appliance generating heat is to

be mounted directly under the vitro-ceramic hob, IT IS

NECESSARYTHATSUCHANAPPLIANCE(theoven)

ANDTHEVITRO-CERAMICHOBAREPROPERLYIN-

SULATED. Failure to comply with this precaution might

result in the incorrect operation of the TOUCH CON-

TROL system.

•Positioning:

This household appliance has been designed for built –in

installation onto a worktop, as shown in the figure (Fig.2).

Use sealing material along the whole perimeter - Fig.4

(Cut dimensions- Fig.2). This operation is necessary in

order to prevent any liquid from entering inside the hob,

being that the flatness of the top, the glass and their cou-

pling cannot be assured. Fix the appliance on the work-

top by using the 4 supports, taking the work top thickness

into account (Fig.2). If, after installation, the lower part

of the appliance is accessible from the lower part of the

ENGLISH

cabinet, it will be necessary to mount a spacing panel at

the distances given (Fig.3). If the appliance is installed

under an oven, this step will not be necessary. The appli-

ance is not intended to be operated by an external timer

or a separate remote control system.

•Electricconnections(Fig.7):

Before carrying out any electric connections, please

make sure that:

- the ground electric cable is 2 cm. longer than the other

cables;

- the electrical system meets any requirement mentioned

in the rating label found on the underside of the work top;

- the electrical system is equipped with an efficient

grounding system and compliant with any standards and

law directives in force.

The grounding system is required by law.

In the case the appliance is not equipped with a pow-

er cord and/or the related plug, please use a material

suitable for the power absorption value mentioned in the

rating label and for the operating temperature. If a direct

connection to the electric network is required, you need

to use an omnipolar power switch with a switch-contact

gap of at least 3 mm, suitable for the value mentioned

in the label, and compliant with the related standards in

force (the yellow/green ground connection shall not be

interrupted by the change-over switch).

Once the appliance installation is completed, the omnip-

olar switch shall be easily accessible.

USE AND MAINTENANCE

•Maintenance(Fig.6):

Remove any food residue and grease drops from the

cooking surface, by using the special scraper provided

on request.

Clean the heated area in the best way possible, using

suitable products and a paper towel, then rinse with wa-

ter and wipe away with a clean cloth.

Through the use of the special scraper (optional),

promptly remove any pieces of aluminum foil and plastic

material, which might have accidentally melted, or sugar

or food remains, and/or remains of sugary foods, from

the heated surface. In this way, any possible damage to

the surface is prevented.

The use of abrasive sponges or irritating chemical clean-

ers, such as sprays for ovens or cleaning agents is not

allowed under any circumstance.

•Use:

Use the touch control system related to the position cor-

responding to your cooking needs, bearing in mind that

the higher is the number selected the higher is the heat

ow.

•Operation(Fig.1):

A - On/Off Key

B - Control lock key

C - “-” key

D - “+”key

E - Double zone key

F-Cooking zones display

G - Cooking zone selection key

H - Timer key

•Startingthehob:

Press key A to switch the hob on.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Emax CRA 6322-1 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Emax CRA 6322-1 Manual

Product: