Manual ELV WS2300 (page 11 of 19) (English)

542403

Zoom out

Zoom in

1/19

13. Basic Programming Modes

Manual Setting modes

The manual setting mode allows the user to change several basic

settings, which is done by accessing one mode after the other simply

by pressing the SET key. After the final mode, or if no key is pressed

for 30 seconds, the manual setting returns to the normal display

mode.

The manual setting takes the user through the following modes:

1. 8 level LCD contrast setting (default level 5)

2. Manual time setting (hours/minutes)

3. 12/24h time display select (default 24 hours)

4. Calendar setting (year/month/date)

5. Time zone setting ±12 hours (default 0)

6. Temperature display unit degree Celsius or Fahrenheit (de-

fault degree Celsius)

7. Wind speed display units in m/s, km/h, mph, Beaufort, knots

(default setting km/h)

8. Rainfall display in mm or inch (default setting mm)

9. Air pressure display in hPa or inHg (default setting hPa)

10. Relative air pressure setting from 920.0 hPa – 1080.0 hPa

(default 1013.0 hPa)

11. Weather forecast sensitivity setting 2 hPa – 4 hPa (default 4

hPa)

12. Storm warning sensitivity setting 3 hPa - 9 hPa (default 5

hPa)

13. Acoustic storm alarm On/OFF (default ON)

To change any of the above values, once your are in the setting

mode, use the PLUS(+) or MINUS(-) keys to select the values fol-

lowed by the SET key to enter the next setting. Continue to press the

SET key to toggle through the setting mode until the LCD returns to

the normal display mode or press the MIN/MAX key at any time to

exit.

Note!

Keeping the PLUS(+) or MINUS(-) key depressed when setting cer-

tain units in the manual setting mode will increase/decrease digits in

greater steps.

Manual time setting

The base station will continue to scan for the radio controlled time

signal from 2am-6 am each day (winter time) or from 3am-6am

(summer time) despite it being manually set. During reception at-

tempts the DCF tower icon will flash.

• If reception has been unsuccessful, then the DCF77 tower

icon will not appear but reception will still be attempted the

following hour within the time frame

• If reception has been successful, the received time and date

will overwrite the manually set time and date and no further

reception is attempted until the following day

14. MIN/MAX Programming Modes

MIN/MAX display Mode

The MIN/MAX Mode provides the user with information about the

MIN/MAX values of all weather data together with the time and date

at which these values were recorded.

Entering each MIN/MAX mode

In the normal display mode for e.g. the indoor temperature and

humidity, press MIN/MAX key to toggle the display between the maxi-

mum, minimum and current records. While the maximum or minimum

values are shown press the DISPLAY key once to show the time and

date that value was received. Now press the MIN/MAX key to toggle

from the minimum and maximum readings and the time and dates the

records were received are also shown. Still in the MIN/MAX mode

(where the time and date for a value are shown), press the DISPLAY

key to move through each respective unit as follows:

• Indoor temperature (max or min with time and date)

• Indoor humidity (max or min with time and date)

• Outdoor temperature (max or min with time and date)

• Outdoor humidity (max or min with time and date)

• Outdoor wind chill (max or min with time and date)

• Outdoor dew point (max or min with time and date)

• Rainfall 24 hours (max or min with time and date)

• Rainfall 1 hour (max or min with time and date)

• Rainfall total (max only with time and date)

GB GB

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of ELV WS2300 in the language / languages: English as an attachment in your email.

The manual is 0,47 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

ELV WS2300 Manual

Product: