536726
9
Zoom out
Zoom in
Previous page
1/62
Next page
7
connecting to a telephone master or secondary
outlet.
7. Do not locate the Smart Home Box closer than 1m
to any large metallic object, (e.g. mirrors, radiators,
etc) as this may affect the radio range of the Smart
Home Box.
MOUNTING THE SMART HOME BOX
1. Undo the two captive fixing screws on top of the
panel and open the cover. The cover is hinged
along the bottom edge.
2. Unclip and remove the two back-up batteries on
upper and lower right hand side of the panel.
3. Route the cable from the Power Supply Unit up
behind along the cable track on the right hand side
of the Smart Home Box, and connect the plug to
the DC power socket in the panel. Ensuring that
the cable is not trapped between the panel and the
wall.
4. Use the fixing template provided (p.56) to mark
the position of two fixing holes on the wall.
Drill two holes, and insert the supplied plastic wall
plugs and then fit two screws into the wall plugs
until almost fully home. Hang the Smart Home
Box over these screws using the two keyhole slots
on either side of the top corners of the panel
casing.
5. Fix the Smart Home Box by inserting a fixing screw
into the lower fixing hole in the panel and tighten
the screw until it just grip the casing. Do not over
tighten the fixing screws as this could damage or
distort the casing.
6. Ensure that the ‘Reset (P1) and the ‘Hard-Wired
Siren tamper detect’ (P51) jumper links are set in
the OFF position.
7. Connect battery leads to both back-up batteries
and refit batteries.
Battery 1 (upper): Blue lead to +ve battery terminal
Black lead to ve battery
terminal
Battery 2 (lower): Red lead to +ve battery terminal
Blue lead to –ve battery terminal
IMPORTANT: Take care when connecting battery
leads to the batteries as connecting incorrectly
could damage the batteries or the Smart Home
Box.
Note: The Power LED may flash to indicate that
the unit is being operated from the back-up
batteries and that mains supply is not present.
8. If fitted, remove the plastic film covering the LCD
display and on the display window on the cover.
9. Close the lid of the Smart Home Box and tighten
the captive fixing screws.
10. Plug in and switch ON the Power Supply Unit, (the
Power LED should illuminate).
11. If required, connect the Smart Home Box to the
telephone line using the cable supplied by inserting
small RJ11 plug into socket marked LINE located
on the bottom edge of the Smart Home Box.
If the cable supplied is not long enough to reach a
suitable phone point then it will need extending
using a coupler and extension lead (not supplied).
Note: If the Tamper of Smart Home Box alarm
sounds during the installation reset the alarm by
pressing:
, ,
on the Smart Home Box Keypad.
Cable Track
Smart Home Box
Fixing Template
Fixing Hole
Keyhole Slots
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elro HIS20SF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elro HIS20SF in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info