621095
13
Zoom out
Zoom in
Previous page
1/23
Next page
- 25 -
will be shown preceding the number for the default login user. And this login name/password will be the default one each
time the login dialog is shown, so the user doesn’t bother to enter the text to login the system.
ESC
Press this button to escape from this screen, and return to Setup Menu display. If the Save dialog is shown, press ENTER to
exit and save, ESC to exit without saving.
Following is a brief description for each item and its specific operations:
Login Name – please follow the Text Input method described in Section 4.1 to modify this item.
P
assword – this item accepts numbers only. Please follow the Text Input method described in Section 4.1 to modify this item.
L
evel – the password level (Administrator, Supervisor, or Operator) for this user. Press +/- buttons to change the level.
6.8 System Setup
In Setup Menu display, press
to change the highlighted option to System, and then press ENTER to call up System Setup as
shown.
The System Setup allows the administrator to set the system time, time zone, time synchronization, language, etc.
The general operations are as below:
▲▼◄►
Press these buttons to select the items.
ESC
Press this button to escape from this screen, and return to Setup Menu display. If the Save dialog is shown, press ENTER to exit
and save, ESC to exit without saving. Please note that if the selected language is changed, the user will be asked to reboot the
system for the newly selected language to take effect.
The following is a brief description for each item and its specific operations:
Time Zone – press +/- buttons to select the time zone for the system. Please refer to Appendix B
for the time zone table.
Daylight Saving Time – press ENTER or +/- to check/uncheck this item. The default value is set by selecting a different time
zone, but the user may check/uncheck this item if the default setting is checked.
System Time
Synchronization time synchronized with TSP Server or not. Press ENTER or +/- to check/uncheck this item. The default
setting is “
” - unchecked.
TSP Server TSP (Time Synchronization Protocol) server name if Time Synchronization is enabled. The system will try to do
time synchronization with the specified TSP server at the system preset interval. Please follow the Text Input method described
in Section 4.1
to modify this item.
Date – system date. Press +/- buttons to modify each of these items.
Time – system time. Press +/- buttons to modify each of these items.
Display Format format used for the system time displayed on the lower-left corner of the main screen. Press +/- buttons to
select the desired format.
Language press +/- buttons to select the language for the system. The languages supported include: English, Russian,
Simplified Chinese, Italy Portugal ,etc.
6.9 RS-232/422/485 Setup
- 26 -
In Setup Menu display, press
to change the highlighted option to RS-232/422/485, and then press ENTER to call up
RS-232/422/485 Setup as shown.
The RS-232/422/485 Setup allows the administrator to setup RS-232 control port, and RS422 or RS-485 control port. Please refer
to the manuals for the connected devices - PTZ cameras – to set these items in RS-232/422/485 Setup.
The general operations are as follows:
▲▼
Press these buttons to select the items.
MODE
Press this button to call up Optional RS-232 Setup screen if it’s built in the DVR. The operations for Optional RS-232 Setup
are the same as RS-232/422/485 Setup.
ESC
Press this button to escape from this screen, and return to Setup Menu display. If the Save dialog is shown, press ENTER to
exit and save, ESC to exit without saving.
The following is a brief description for each item and its specific operations:
Device Type PTZ or N/A (Not Available). Press +/- buttons to change the type. Please note that PTZ can only be
selected for either RS-232 or RS-485, but not both.
Model PTZ model of the connected devices. The PTZ models supported include Pelco D protocol Dome, SamSung
SCC-641P, etc. Press +/- buttons to change the supported model (or protocol).
Baud Rate – press +/- buttons to change the value.
Data Bit – press +/- buttons to change the value.
Stop Bit – press +/- buttons to change the value.
Parity – (Odd, Even, or None). Press +/- buttons to change the value.
DVR/Camera ID for PTZ => the device ID for this digital video/audio recorder, and it must not conflict with the other
devices connected in the same control port. Press +/- buttons to change the ID.
6
.10 Network Setup
In Setup Menu display, press
to change the highlighted option to Network, and then press ENTER to call up Network Setup
as shown.
The Network Setup allows the administrator to setup all Ethernet network related parameters. Please check with your network
a
dministrator to set these parameters correctly. For most home users, the typical configuration would connect the DVR to a router
to the internet. In those cases, please see your router user manual for details on how to port forward data and controls to/from the
router to the DVR. In addition, most home users will have dynamic IP addressing. Please use a dynamic DNS service, such as
http://www.dyndns.com
to access your router and DVR from the internet.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elro DVR154S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elro DVR154S in the language / languages: English as an attachment in your email.

The manual is 1,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Elro DVR154S

Elro DVR154S User Manual - German - 24 pages

Elro DVR154S User Manual - Dutch - 22 pages

Elro DVR154S User Manual - French - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info