708678

Elro AS80KE11 Manual

3
Zoom out
Zoom in
Previous page
1/5
Next page
3
2.
In “Keypad codes”, enter the Username in the first box, and the desired
access code in the second box (it will appear starred).
3.
Click on “+” to enter multiple users and code (code 1, code 2, etc).
Note:
-
Please use a different password for each user.
-
All access codes are not stored in the keypad, instead they are stored in the
gateway and in the cloud platform. This way you can add as many keypads
without having to set up each one.
Operation
1. Setting Security Modes
2. Panic
Press + simultaneously for 2 seconds.
The keypad will emit the radio signal to the system and a full alarm condition will
occur.
3. Keypad self lock
a.
When an incorrect code is entered once, the back light of digits 0~9 will
start to flash 3 times.
b.
If incorrect codes are entered three times consecutively, the keypad will be
locked out for the next 30 seconds. During this period the keypad will not
respond to any keypad press.
c.
Following subsequent lockout of three times, the keypad will alert the
gateway of an unauthorized entry attempt.
4. Tamper Protection
The Keypad incorporates a tamper protection feature to protect against
unauthorized attempts to disassemble it. Any attempt to remove the keypad
from its wall plate will trigger the tamper switch which then initiates an alarm
condition.
a.
First press either the Arm key , Part-arm1 key ,
Part-arm2 key or the Disarm
on the keypad.
b.
Then enter one of the 4-digit access codes created during the
Mounting the Keypad
Tamper
Switch
configuration.
c.
If code entry is correct, the backlight of digits 0~9 on the Keypad will
extinguish. The back light of digits 0~9 will flash three times if
unsuccessful.
Note: See “Keypad self lockout” about unauthorized entry detection.
The Keypad should be mounted in a position close to the main entrance door so
that the access codes can be entered easily.
Ensure that the position selected for the Keypad is within the effective range of
the gateway.
Note: Do NOT fix the Keypad to metalwork or locate the unit within 1 meter of
metalwork (i.e. radiators, water pipes, etc) as this could affect its radio range.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elro AS80KE11 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elro AS80KE11 in the language / languages: English as an attachment in your email.

The manual is 0,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info