614482
119
Zoom out
Zoom in
Previous page
1/124
Next page
118
1. The needle thread tension is too tight.
2. The needle is either too large or too small for the thread.
3. The stitches are too long for fabric weight.
1. The machine is not plugged in.
2. A thread is caught in the hook area.
3. Presser foot is in up position.
4. The control circuit is not working correctly.
5. The foot control is plugged in for traditional sewing when the Start/Stop
key is pressed.
1. The fine adjustment screw is not adjusted properly.
2. The correct presser foot is not being used.
3. The needle thread tension is too tight.
4. The stitch length is not suitable for the fabric being sewn.
5. Use interfacing for fine or stretch fabrics.
6. The embroidery hoop is not attached correctly.
7. The fabric is not taut in the embroidery hoop.
8. The carriage movement is obstructed by something around the machine.
9. The fabric is caught or pulled while embroidering.
1. The stitch length is not suitable for the fabric being sewn.
2. Interfacing is not being used with fabrics.
3. There is a gap between the slider and spring holder.
4. Buttonhole lever is not pulled down.
5. Programmable buttonhole #19 needs to have fine tuning adjusted.
1. Threads have been caught in the hook area.
2. Lint has built up in the bobbin case or hook area.
3. Feed dog is packed with lint.
1. The pressure foot dial is not adjusted correctly.
2. The correct presser foot is not being used.
1. Screen contrast is not adjusted for best viewing results.
2. Machine has not been used for a time and enters eco mode.
1. Card is not inserted correctly.
1. Something is caught between the carriage and machine body.
2. The carriage movement is obstructed by something around the machine.
1. Bobbin winding spindle is positioned for winding bobbin.
2. The control circuit is not working correctly.
3. The key(s) need to be aligned.
Gathering
Machine does not
work
Stitches are
distorted
Buttonholes do
not work
Noisy operation
Fabric layers shift
LCD Touch
Screen is not
visible
PC Design Card
does not work
Strange sound
heard when
switching on
machine
LCD touch screen
keys do not
function
12
22
33
14
111-112
Lower foot.
Turn machine
off and on.
16
13
31
12
33
Use stabilizer.
88
87
15
Stop machine
and free fabric.
52
47
51
49
13
111-112
111-112
111-112
9
6-7
18
18
101
15
15
25
Turn machine
off and on.
19
TROUBLESHOOTING
119


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elna eXpolore 8600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elna eXpolore 8600 in the language / languages: English as an attachment in your email.

The manual is 9,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info