614482
118
Zoom out
Zoom in
Previous page
1/124
Next page
117
Condition
Needle thread
breaks
Bobbin thread
breaks
Needle breaks
Skipped
stitches
Seam
puckering
Slipping fabric
Fabric does
not feed
smoothly
Cause
1. The needle is not threaded properly.
2. The needle thread tension is too tight.
3. The needle is bent or blunt.
4. The needle is not inserted correctly.
5. The needle thread and bobbin thread are not properly under (drawn to the
back of) the presser foot when starting to sew.
6. The fabric is not moved to the back when sewing is finished.
7. The thread is either too heavy or too fine for the needle.
8. The thread is tangled around spool.
9. The needle thread has not been held in the thread holder when
embroidery sewing started.
1. The bobbin thread is not threaded correctly in the bobbin case.
2. Lint has collected in the bobbin case.
3. The bobbin is damaged and does not turn smoothly.
1. The needle is not inserted correctly.
2. The needle is bent or blunt.
3. The needle clamp screw is loose.
4. The needle thread tension is too tight.
5. The fabric is not moved to the back when sewing is finished.
6. The needle is too fine for the fabric being sewn.
7. The correct presser foot is not being used.
1. The needle is not inserted correctly.
2. The needle is bent, blunt or has a burr.
3. The needle and/or the thread are not suitable for the fabric being sewn.
4. A stretch needle is not being used for sewing stretch, very fine and
synthetic fabrics.
5. The needle thread is not threaded properly.
6. The foot pressure dial is not adjusted correctly.
7. The wrong needle is being used.
8. The embroidery hoop is not attached correctly.
9. The fabric is not taut in the embroidery hoop.
1. The needle thread tension is too tight.
2. The machine is not threaded correctly.
3. The needle is too large for the fabric being sewn.
4. The stitch length is too long for the fabric.
5. The foot pressure dial is not adjusted correctly.
Place lightweight stabilizer under lightweight fabrics.
6. The fabric is not taut in the embroidery hoop.
1. The foot pressure dial is not adjusted correctly.
2. The correct presser foot is not being used.
1. The feed dog is packed with lint.
2. The foot pressure dial is not adjusted correctly.
3. The stitches are too short.
4. The feed dog was not raised after being lowered.
5. The correct presser foot is not being used.
See page(s)
27
12
22
22
29
32
22
24
89
26
111-112
Change bobbin.
22
22
22
12
32
22
31
22
22
22
23
27
9
23
88
87
12
27
22
33
9
87
9
31
111-112
9
33
10
31
TROUBLESHOOTING
118


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elna eXpolore 8600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elna eXpolore 8600 in the language / languages: English as an attachment in your email.

The manual is 9,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info