Manual Elna eXplore 240 (page 44 of 90) (English, German, French)

614466

Zoom out

Zoom in

1/90

Zipper Insertion

(Model 220 – optional foot)

• Lapped Application

Lapped zippers are usually inserted into a side seam

of skirts or pants, for example.

Attach the pin on the zipper foot to the groove on the

shank.

• To sew the left side of the zipper, attach the zip-

per foot on the right-hand side.

• To sew the right side of the zipper, attach the

zipper foot on the left-hand side.

• Fabric Preparation

Add 1 cm (3/8”) to the zipper size. Use this measure-

ment and mark the opening for the zipper.

Place right sides of fabric together and sew the

seam located below zipper placement. (Make sure to

reverse sew the stitches directly below the zipper

placement.)

Increase stitch length to 4 and baste the zipper

opening closed. Press the seam and basting seam

open.

Open zipper and place it face down on the seam

allowance. Teeth are on the seam line and zipper top

is 1 cm (3/8”) from fabric top edge. Attach foot with

left side pin. Baste zipper in place, sewing from bot-

tom to top.

Close zipper. Turn zipper face up (right seam allow-

ance forms a small fold at basting line) and smooth

zipper teeth away from seam. Attach foot with right

side pin. Reset straight stitch length to 2.5. Starting

at the bottom, sew through the folded seam allow-

ance and zipper tape.

1cm

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Elna eXplore 240 in the language / languages: English, German, French as an attachment in your email.

The manual is 5,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Elna eXplore 240 Manual

Product: