Manual Elna eXplore 220 (page 80 of 90) (English, German, French)

614465

Zoom out

Zoom in

1/90

SECTION VI

Taking Care of Your Machine

The area around the bobbin, hook and feed dog

must be cleaned each time the machine has been

used a lot.

Clean the outside of the machine with a soft cloth

and pure soap.

Cleaning the Bobbin Case and Hook

Loose threads and dust may cause puckered

stitches and thread breakage during stitching. Check

for lint buildup after each project is completed.

Unplug the machine before cleaning.

Turn the flywheel until the needle is raised and re-

move the needle.

Remove the extension table and open the bobbin

cover. Pull out the latch A and remove bobbin case

and bobbin.

Open the hook race ring holders B and remove the

hook race ring C.

Remove the hook D. Clean the hook race E with a

brush or a soft cloth. (You may also use a small

vacuum cleaner.)

To assemble the hook race, hold the hook D by the

center pin and carefully put it back into the hook race

E. Attach the hook race ring C making sure the bot-

tom pin fits into the notch. Turn the holders B back

into position to lock the hook race ring. Insert the

bobbin case. Oil the hook slightly.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Elna eXplore 220 in the language / languages: English, German, French as an attachment in your email.

The manual is 5,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Elna eXplore 220 Manual

Product: