Manual Elna eXplore 220 (page 66 of 90) (English, German, French)

614465

Zoom out

Zoom in

1/90

4-Step Buttonhole

(

Model 220 Only)

All buttonholes should use interfacing that is the

same weight as the fabric. Interfacing is especially

important when sewing on stretch fabrics.

Always

make a test buttonhole on extra fabric before sewing

on your garment.

Use a shorter stitch length for finer fabrics . Use a

longer stitch length for heavier fabrics .

1. Set stitch selection knob on buttonhole step A1.

Turn the flywheel toward you to raise the needle

to its highest position. Raise presser foot. Mark

but tonhole placement.

2. Place fabric under presser foot with slide pushed

back as far as it will go (see illustration). Lower

presser foot. Sew left side of buttonhole. Stop

sewing when desired length is sewn.

3. Set stitch selection knob on buttonhole step A2.

Sew 5 bartack stitches.

4. Set stitch selection knob on buttonhole step A3.

Sew right side of buttonhole. Stop sewing when

right length equals left length.

5. Set stitch selection knob on buttonhole step A4.

Sew 5 bartack stitches.

6. Cut threads at least 10 cm (4”) long. Pull needle

thread to wrong side of fabric. Knot the threads.

To cut the buttonhole open, place a pin just inside

the bartack (to prevent accidentally cutting

bartack) and use a seam ripper.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Elna eXplore 220 in the language / languages: English, German, French as an attachment in your email.

The manual is 5,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Elna eXplore 220 Manual

Product: