703987
16
Zoom out
Zoom in
Previous page
1/76
Next page
10
CAUTION:
Turn OFF the power switch before changing
the foot. Always use the proper foot for the
selected pattern. The wrong foot can cause the
needle to break.
Removing and Attaching the Presser Foot Holder
Presser Foot Lifter
The presser foot lifter raises and lowers the
presser foot.
You can raise it about 1/4˝ (0.6 cm) higher than
the normal up position for easy removal of the
presser foot, or to help you place heavy fabric
under the foot.
q
Lowered position
w
Normal up position
e
Highest position
Changing the Presser Foot
To remove:
Remove the setscrew by turning it
counterclockwise with a screwdriver and remove
the presser foot holder from the presser bar.
To attach:
Match the hole in the presser foot holder with the
threaded hole in the presser bar. Fit the setscrew
into the hole. Tighten the screw by turning it
clockwise with a screwdriver.
q
Setscrew
w
Presser foot holder
e
Hole
r
Threaded hole
q
w
e
e
w
w
q
q
w
e
r
To attach:
Insert the presser foot pin q into the slit w of the
presser holder and push the presser foot to lock it
in place.
To remove:
Pull the foot in the direction of arrow to remove the
presser foot.
CAUTION:
Turn OFF the power switch before detaching or
attaching the presser foot holder.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elna eXplore 160 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elna eXplore 160 in the language / languages: English, German, French as an attachment in your email.

The manual is 4,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info