614476
43
Zoom out
Zoom in
Previous page
1/52
Next page
41
SECTION IV - Taking Care of Your Machine
Your machine has been meticulously designed and
manufactured to give you a lifetime of sewing pleasure. Do
not store the machine in a high humidity area, near a heat
radiator or in direct sunlight. The machine is selflubricating,
however, the area around the bobbin and hook must be
cleaned each time the machine has had extensive use. Do
not dismantle the machine further than explained on these
pages. Clean the outside of the machine with a soft cloth
and pure soap.
Cleaning the Bobbin Area
Loose threads and dust may cause puckered stitches
and thread breakage during stitching. Check for lint
buildup after each project is completed.
Press the Up/Down Needle key until the needle is
raised. Turn off power switch. Unplug the machine before
cleaning.
Slide the bobbin cover plate release button to the
right to remove the bobbin cover plate.
Take out the bobbin; brush out dust and lint. (You can
also use a small vacuum cleaner.)
Insert the bobbin and attach the bobbin cover plate.
Cleaning the Hook Area and Feed Dog
Remove the presser foot, bobbin cover plate, needle
and bobbin. Use the screwdriver supplied with the
machine to remove the screw on the left side needle
plate.
Remove the needle plate. Lift up and remove the
bobbin case.
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elna eXperience 660 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elna eXperience 660 in the language / languages: English as an attachment in your email.

The manual is 2,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info