614476

Elna eXperience 660 Manual

14
Zoom out
Zoom in
Previous page
1/52
Next page
12
7. Select Mode Key
When you switch on the machine, the Direct Select Mode is active. You
can select the first ten stitches (illustrated on the keyboard) with a
single touch of the key.
Touch the “MODE” key to activate the 3 Digit Mode. You can select all
stitches by entering the 3 digits for the desired stitch.
Touch “MODE” key again to reactivate the Direct Select Mode.
8. Memory Save/Recall Key
The 3 Digit Mode has three separate memories for saving a sequence
of stitches. Press this key to activate memory 1 (M1). Press key again
to activate M2. Once a memory is activated, press the “ENTER” key to
save the sequence.
To recall a saved memory, press “M” key until desired memory appears.
To activate the saved sequence, press “Mirror Image” key.
9. Enter Key
Press this key after selecting a stitch in the 3 Digit Mode and that stitch
will be memorized. Up to 50 stitches can be combined.
These stitches cannot be memorized into a sequence: 009 - 023 and
030.
10. Mirror Image Key
When this key is pressed after selecting a stitch in the 3 Digit Mode, the
stitch will be flipped horizontally (as it appears on the stitch chart).
If you are in a permanent memory (M1, M2, or M3), press this key to
recall the saved sequence.
11. My Personal Setting Key
Select a stitch in Direct Select Mode and override the factory settings
by changing width/needle position or length. Press this key after
changing settings. Press “ENTER” key. New settings will now be saved
as the default settings with PS symbol in LCD screen.
12. Clear Key
When this key is pressed, the last memorized stitch or the stitch that is
above the cursor will be cleared. Press and hold the “C” key; the entire
sequence is cleared. If this key is pressed and held after sewing a
sequence, the sequence will be deleted.
13. Review Memory Left Key
Use this key to review stitches in a memorized sequence when all
stitches do not appear on the screen.
OR
Press this key to move the cursor left until it is under the stitch that will
be edited.
14. Review Memory Right Key
Use this key to review stitches in a memorized sequence when all
stitches do not appear on the screen.
OR
Press this key to move the cursor right until it is under the stitch that will
be edited.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elna eXperience 660 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elna eXperience 660 in the language / languages: English as an attachment in your email.

The manual is 2,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info